Hi, Philippe, Thank you very much for your answer. I later found that the interrupt for the dm9000 was not defined OK in the platform data (it was somehow enabled both for rising edge and for high level). Surprisingly, this caused no problem without the adeos patch - this is the reason we did never caught that error before!
Once this was corrected, the system boots OK and the network works, but not OK - after a short while, two dm9000 driver messages 'status check fail: 70' appears. These messages indicate a problem in the reading of the dm9000 rx buffer. Once a status check of that kind appears, the driver disables automatically the dm9000 interrupts. Since now the system boots, I can easily check /proc/interrupt. I will also check with the patch that you suggest, and come back with any news :) Best regards, Javier El 07/10/2010 16:33, Philippe Gerum escribió: > On Sun, 2010-10-03 at 21:18 +0200, Javier Herrero wrote: >> Hello, >> >> I'm trying adeos on a Blackfin BF532 board with a DM9000 ethernet >> interface. If ethernet is down (cable disconnected) the system boots and >> works OK, but as soon as the ethernet cable is plugged, the system >> apparently hangs. After several seconds, a message dm9000 dm9000.0: >> status check fail: 226 appears. >> >> I've read a previous post about problems with dm9000 and an ARM >> processor, >> https://mail.gna.org/public/xenomai-help/2010-03/msg00147.html but it >> seems that there was not a response. >> > > dm9000 is probably not the important issue, what makes a difference is > which kind of IRQ is handled by this device. Knowing about the output > of /proc/interrupts when the pipeline is disabled would help. > > You may want to upgrade to this patch as well: > http://download.gna.org/adeos/patches/v2.6/blackfin/older/adeos-ipipe-2.6.34-blackfin-1.15-01.patch > > >> Thank you very much. Best regards, >> >> Javier >> > -- ------------------------------------------------------------------------ Javier Herrero EMAIL: [email protected] Chief Technology Officer HV Sistemas S.L. PHONE: +34 949 336 806 Los Charcones, 17 FAX: +34 949 336 792 19170 El Casar - Guadalajara - Spain WEB: http://www.hvsistemas.com _______________________________________________ Adeos-main mailing list [email protected] https://mail.gna.org/listinfo/adeos-main
