On 04/27/2011 09:56 PM, Gilles Chanteperdrix wrote: > But I think your problem has more to do with the following commit, could > you try reverting it? > http://git.xenomai.org/?p=ipipe-gch.git;a=commitdiff;h=6ab29d9c7a4b119f45ef4d93780e894fe1c0c6c6;hp=cd9c5e016092258d4450e137be2d0844d0fe8b38 > > The same issue was reported on ixp4xx. Just tried to revert this patch. Hangs. But now in a different way: it starts to initialize peripherals and stops on LED initialization. Looks like race conditions since it stops in slightly different place each time I try to boot (randomly at led3, led4 or "backlight" LED). Last lines of dmesg are, i.e.:
[ 3.090000] samsung-ts s3c2440-ts: driver attached, registering input device [ 3.100000] input: S3C24XX TouchScreen as /devices/virtual/input/input0 [ 3.120000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics [ 3.120000] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling [ 3.135000] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 [ 3.135000] i2c /dev entries driver [ 3.155000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics [ 3.160000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled [ 3.180000] s3c-sdi s3c2440-sdi: powered down. [ 3.180000] s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ [ 3.185000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [ 3.200000] Registered led device: led1 [ 3.205000] Registered led device: led2 [ 3.210000] s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz). [ 3.215000] Registered led device: led3 [ 3.220000] Registered led device: led4 (hangs) Going to try kgdb over serial line. -- Alex _______________________________________________ Adeos-main mailing list [email protected] https://mail.gna.org/listinfo/adeos-main
