I did the q vol status=pending and it has the same tapes. They are pending.
I had forgotten that the tapes stay in the pending status for three days.
Thanks!

-----Original Message-----
From: Doug Thorneycroft [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 18, 2000 10:41 AM
To: [EMAIL PROTECTED]
Subject: Re: Several tapes with zero capacity and zero utilization


They are probably pending, do a q vol status=pending and see if the list
matches your zero capacity tapes.

On Wednesday, October 18, 2000 7:10 AM, Tyree, David
[SMTP:[EMAIL PROTECTED]] wrote:
>         I'm new with the ADSM system, so I hope I don't sound to dumb
here!
> I've been looking at the list for a couple of months and I've gotten a lot
> of good information from it so far.
>         Here we go, I run a select command every few days to check on the
> number of reclaimable tapes we have in the system. When I get several
tapes
> with a PCT_RECLAIM above 70-80% I run the reclamation process. We do the
> tape reclamation manually. Here is the select command we use:
>
>         select volume_name,est_capacity_mb,pct_utilized,pct_reclaim from
> volumes where stgpool_name='COPYPOOL' order by pct_reclaim desc
>
>
>         The following is part of the result I get:
>
> VOLUME_NAME                 EST_CAPACITY_MB     PCT_UTILIZED
PCT_RECLAIM
>
> SG0113                              19317.5                        95.9
> 4.1
> SG0117                              14658.0                        97.1
> 2.8
> SG0007                                  0.0                          0.0
> 0.0<---------------??
> SG0009                                  0.0                          0.0
> 0.0<---------------??
> SG0014                                  0.0                          0.0
> 0.0<----------------??
> SG0027                                  0.0                          0.0
> 0.0<----------------??
> SG0030                              13671.7                        99.9
> 0.0
> SG0046                                  0.0                          0.0
> 0.0<-----------------??
> SG0047                              13533.1                      100.0
> 0.0
> SG0075                                  0.0                           0.0
> 0.0<----------------??
> SG0108                                  0.0
> 0.0                 0.0<----------------??
> SG0124                                  0.0                           0.0
> 0.0<-----------------??
> SG0133                                  0.0                           0.0
> 0.0<----------------??
> SG0135                              11764.2                      100.0
> 0.0
> SG0139                              10122.4                      100.0
> 0.0
>
>         How can I have a tapes with 0 capacity and 0 utilization?
>         We use 3590 tapes in  a 3494 library attached to an IBM Netfinity
> server running NT 4 using ADSM version 3.7.3.
>         Any ideas?
>
>
> David Tyree
> Microcomputer Specialist
> South Georgia Medical Center
> 912.333.1155

Reply via email to