Larry, we have the same sort of config but on an aix node...before we can
define the library and drives we had to delete
them from the aix OS (rmt devices) and redefine them as tivoli storage
management devices (lib - lb0 drives- mt0)
Robert Burton
Open System Storage Analyst
Royal Bank of Canada
315 Front St West
Toronto, On, M5V 3A4
416-348-3849
email: [EMAIL PROTECTED]
-----Original Message-----
From: Walker, Lesley R [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 14, 2000 11:09 PM
To: [EMAIL PROTECTED]
Subject: StorageTek L20
Hi all,
I need help to get my tape library going.
It's a StorageTek L20, connected to a server which is TSM 3.7.2 on Solaris
7.
I've connected up the cables and done a boot -r (to get the OS to recognise
the new devices, which it appears to).
But when I try to define the library, the admin client just hangs.
Are there any OS tools I can use to test the library?
More details:
Robotics are accessed via SCSI - it should be able to work the same as any
other SCSI library.
Robotics and drive are on the same SCSI chain.
Library is target 0, drive is target 1
Cabling goes server->library->drive->terminator
--
Lesley Walker
Distributed Systems Services, EDS New Zealand
[EMAIL PROTECTED]
"Where a calculator on the ENIAC is equipped with
18,000 vacuum tubes and weighs 30 tons,
computers in the future by the year 2000, may have
only 1,000 vacuum tubes and weigh only 1.5 tons"
Popular Mechanics, March 1949