In our library each slot has an barcode-label indicating that it is empty. If it contains a cartridge, it is covered and the barcode-reader sees only the label of the cartridge. Is the label of the empty slot intact in your library? Is it intact for the previous and next slot? Does it help to put a intact cartridge there? No more ideas; good luck! Marc Levitan schrieb: > > I have made progress though... the original issue is at the bottom. > > I ran a audit library Tekwolf checklabel=barcode and this is what I got... > > 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT > LIBRARY > tekwolf checkl=barcode > 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the > BACKGROUND at 13:56:42. > 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF > started as process 302. > 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in > slot-id 47 in library TEKWOLF; loading in drive to > read > label. > 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in > slot-id 184 in library TEKWOLF; loading in drive to > read > label. > 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in > slot-id 197 in library TEKWOLF; loading in drive to > read > label. > 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in > slot-id 204 in library TEKWOLF; loading in drive to > read > label. > 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in > slot-id 210 in library TEKWOLF; loading in drive to > read > label. > 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=00006C03, > CC=301, KEY=05, ASC=30, ASCQ=00, > SENSE=70.00.05.00.00.00- > .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., > Description- > =Cartridge load failure). Refer to Appendix B in > the > 'Messages' manual for recommended action. > 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF > failed. > 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the > BACKGROUND completed with completion state FAILURE > at > 13:56:59. > SO I looked up which volumes were in the element slot numbers and TRIED to > check them out and got this: > > ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF > 000224 > CHECKLABEL=YES FORCE=NO REMOVE=YES > ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at > 09:07:04. > ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF > started as process 307. > ANR0609I CHECKOUT LIBVOLUME started as process 307. > ANR8300E I/O error on library TEKWOLF (OP=00006C03, CC=314, KEY=05, ASC=3B, > ASCQ=0E, > SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00., > Description=The source slot or drive was empty in an attempt to move a > volume). > Refer to Appendix B in the 'Messages' manual for recommended action. > > So... I decided to check out the volumes WITHOUT checking the Label: > > ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF > 000378 > CHECKLABEL=NO FORCE=NO REMOVE=YES > ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at > 09:26:09. > ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000378 in library TEKWOLF > started as process 315. > ANR0609I CHECKOUT LIBVOLUME started as process 315. > ANR9999D mmsscsi.c(9067): Could not move volume 000378 from slot 204 to > slot > 1010. > ANR8827E No Entry/Exit port is available on library TEKWOLF. > ANR8307I 083: Remove ECARTRIDGE volume 000378 from slot with element number > 204 > of library TEKWOLF; issue 'REPLY' along with the request ID when ready. > ANR2017I Administrator ADMIN issued command: REPL 83 > ANR8499I Command accepted. > ANR8438I CHECKOUT LIBVOLUME for volume 000378 in library TEKWOLF completed > successfully. > ANR0985I Process 315 for CHECKOUT LIBVOLUME running in the BACKGROUND > completed > > This was SUCCESSFUL!!! > > Now I re-ran the Audit Library Tekwolf checklabel=barcode and received an > error: > 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in > slot-id 210 in library TEKWOLF; loading in drive to > read > label. > 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=00006C03, > CC=301, KEY=05, ASC=30, ASCQ=00, > SENSE=70.00.05.00.00.00- > .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., > Description- > =Cartridge load failure). Refer to Appendix B in > the > 'Messages' manual for recommended action. > 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF > failed > > *** HERE IS MY PROBLEM *** > There is NO Media in ELEMENT SLOT 210! I cannot checkout what is in slot > 210 because nothing is there! I also cannot audit because it Fails! > > Any thoughts?????????????????? Thanks in Advance! > > >******************************************************************************************************************************************************************************** > > Hi All- > > I am unable to successfully Audit our StorageTek Library. (Audit Library > libraryname) > > The Audit gets to about 3/4 done when I receive an I/O Error: > > 03/27/01 10:08:07 ANR8300E I/O error on library TEKWOLF (OP=00006C03, > > CC=301, KEY=05, ASC=30, ASCQ=00, > SENSE=70.00.05.00.00.00- > .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., > Description- > =Cartridge load failure). Refer to Appendix B in > the > 'Messages' manual for recommended action. > and here is the errpt on the AIX TSM server. > > 5680E405 0327100801 P H lb0 STORAGE SUBSYSTEM FAILURE > 5680E405 0327100801 P H lb0 STORAGE SUBSYSTEM FAILURE > > I am at AIX 4.3.3, TSM 3.7.4 > StorageTek 9740 with 4 Drives 9840 > > It always stops on a different tape. I have exported several tapes and > retried the audit several times. Always same result. > I had the StorageTek Service come in and check the library, and it checked > out ok. > I find it hard to believe that all of a sudden all of the tapes in the > library are bad! > > Has anyone experienced this? > Any recommended next steps??? > > Marc Levitan > Senior LAN Engineer > PFPC Global Fund Services > 508 871-4459 -- Mit freundlichen Grüßen Bernhard Unold
begin:vcard n:Unold;Bernhard tel;work:+49 7071/29-80130 x-mozilla-html:FALSE adr:;;;;;; version:2.1 email;internet:[EMAIL PROTECTED] fn:Bernhard Unold end:vcard
