Not mentioned in your post but with DLT8000 drives you must use DLT type IV
or better cartridges.
Jack Palmadesso
-----Original Message-----
From: Michael Hack [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 04, 2001 8:28 AM
To: [EMAIL PROTECTED]
Subject: DLT 8000 / TSM problem
Knows anyone this problem with DLT8000 and TSM 4.1.3.0 under NT?
To label a tape works fine.
When TSM try to write data on the tape a undefined write error occurs
without any sense keys .
With the DLT7000 drives we have no problems.
Environment:
NT 4.0 SP5
TSM 4.1.3.0
Drive firmware:
STK DLT8000: V43 and V51
Quantum DLT8000: V20
Activity Log von TSM 4.1.3.0
04/04/2001 11:01:37 ANR0984I Process 2 for MIGRATION started in the
BACKGROUND at 11:01:37.
04/04/2001 11:01:37 ANR1000I Migration process 2 started for storage pool
DISKPOOL.
04/04/2001 11:01:38 ANR8326I 001: Mount DLT volume SCRTCH R/W in drive
MT5.0.0.2 (MT5.0.0.2) of library DLTLIB1 within 60 minutes.
04/04/2001 11:01:42 ANR8328I 001: DLT volume BAND02 mounted in drive
MT5.0.0.2 (MT5.0.0.2).
04/04/2001 11:01:42 ANR1340I Scratch volume BAND02 is now defined in
storage pool DLTPOOL.
04/04/2001 11:01:42 ANR1411W Access mode for volume BAND02 now set to
"read-only" due to write error.
04/04/2001 11:01:47 ANR8360I Volume BAND02 has been deleted from MANUAL
library DLTLIB1.
04/04/2001 11:01:47 ANR1341I Scratch volume BAND02 has been deleted from
storage pool DLTPOOL.
04/04/2001 11:02:05 ANR8468I DLT volume BAND02 dismounted from drive
MT5.0.0.2 (MT5.0.0.2) in library DLTLIB1.
Thanks
Michael