Just configure the ADSM server to use both Libraries, setup new tape storage
pools for the new library, make sure all new data is going to the new tapes
(either rename tape storage pools or change the next storage pool for the
DISK backup pools). Now either use move data or set the original tape
storage pool's next storage pool as the new tape storage pool and update hi
and low migration percent to start the migration.
For faster the just use move data TAPE stg=NEWTAPEPOOL for each tape the
data needs to be moved for.
Jeff Bach
Home Office Open Systems Engineering
Wal-Mart Stores, Inc.
WAL-MART CONFIDENTIAL
-----Original Message-----
From: Joe Faracchio [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, May 16, 2001 11:40 AM
To: [EMAIL PROTECTED]
Subject: Re: How to make this work ? (One more addition)
Let me see if I can remember this off the top of my head.
1) checkout all tapes from old library
2) delete library definitions
3) delete drive definitions
4) define new drive and new library
5) check tapes into new library
N.B. you are NOT deleting the tapes or the data just checking out.
No need to RTFM ( read the fine manual.) Just go online and do:
Help Query DRIVE or Help Query Library
and at the end of it you will see:
-----------------------------------------------------------------------
Related Commands
Table 164. Commands Related to QUERY DRIVE
Command Description
AUDIT LIBRARY Ensures that an automated
library is
in a consistent state.
DEFINE LIBRARY Defines an automated or manual
library.
DELETE LIBRARY Deletes a library.
QUERY LIBRARY Displays information about one
or
more libraries.
UPDATE DRIVE Changes the attributes of a
drive.
adsm>
----------------- OR
----------------------------------------------------
Command Description
AUDIT LIBRARY Ensures that an automated
library is
in a consistent state.
DEFINE LIBRARY Defines an automated or manual
library.
DELETE LIBRARY Deletes a library.
--------------------------------------------------------------------------
Then repeat the HELP command for each of these and look at the end
of them
for more related commands.
cheers ... joe.f.
Joseph A Faracchio, Systems Programmer, UC Berkeley
Private mail on any topic should be directed to :
[EMAIL PROTECTED]
On Mon, 14 May 2001, Ghanekar, Prasanna wrote:
> We are running following ADSM environment, well not anymore!
> The Tape library IBM 3447 broke this morning, It had the changer
arm failure
> and that piece needs replacement.
> We are planning to replace this with "StorageTek L 700 " library
asap. I
> would like to know How do I get the new library working with the
same old
> ADSM server. Is it possible ?
> If Yes, what are the steps I need to follow to remove old library
from the
> configuration and make this one working.
> And, How to move the data from the old DLT tapes, which were
configured for
> the old library to the new library.
>
> Current Server configuration:
> Windows NT 4.0 server with SP 5
> ADSM v 3.1.2.40
> Tape library: IBM 3447
> Internal 4mm Tape drive and an external DLT drive.
>
>
> Thanks in advance,
>
> Prasanna
>
> Prasanna Ghanekar
> <<...OLE_Obj...>>
> EDS Pontiac East
> 2100 S Opdyke Rd
> MI 48341
> *: (248) 972-4547
>
**********************************************************************
This email and any files transmitted with it are confidential
and intended solely for the individual or entity to
whom they are addressed. If you have received this email
in error destroy it immediately.
**********************************************************************
