Hi all,
I have a 100 DLT cartridges library with 35/70GB capacity each.
This is like 7TB approximately data on the library if the compression
utilization is like 100%( which is not the case).
In addition, there are like 37 cartridges with scratch status.
I would like to know how much data I have on my tsm server so I have
ran the following 2 select q.
'select node_name,sum(file_size) as sum_file_size from contents group
by
node_name'
'select node_name,sum(PHYSICAL_MB) as sum_phys_mb from occupancy group
by node_name'
and I got the following result
9,030,520 MB from the contents table
2,422,690 MB from the occupancy table
From the occupancy table I have a reasonable number that I can live
with
but the values from the contents are bigger then my library with a 100%
compression.
what is the explanation for that number?.
I have 9TB on a library(Content Table) while the Maximum capacity of
library is 7TB ( Not to mention that I have sum scratch cartridges on
the library ).
I appreciate your prompt reply.
All the Best,
Ofer