We have TSM 3.7.x running in an HACMP environment (AIX 4.3.3). I don't know
of any special setting we needed to set in TSM. TSM is not aware that it is
part of an HACMP. We made the TSM server directory on a disk array. This
lv is a resource that is switched between nodes as the TSM resource is
moved. All storage areas (disk pools), db areas, and log areas are on the
storage array and switched between nodes as the resource is switched. One
trick that we had to do during fail-over is dismount volumes from the tape
drives using tapeutil and make sure that the scsi lock is broken during
fail-over. Since we have cron jobs specific for TSM, we had to make cron a
resource also. If you have any specific questions you can e-mail me. It
was done a couple of years ago and has been running without any major
problems.
--
Phillip Ford
Senior Software Specialist
Corporate Computer Center
Schering-Plough Corp.
(901) 320-4462
(901) 320-4856 FAX
[EMAIL PROTECTED]
-----Original Message-----
From: Bert Moonen [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 08, 2001 7:32 AM
To: [EMAIL PROTECTED]
Subject: ADSM/TSM and HACMP
Hello guys,
who can tell me where i find any information about HACMP and ADSM / TSM.
Some UNIX(AIX)-guys are setting up an HACMP environment(AIX 4.3) and want to
know what settings are required in ADSM or TSM.
We are now running an ADSM-Server 3.1.2.90(AIX 4.3.3), in a few months we
are going to upgrade to TSM 4.2.(AIX 4.3.3).
Greetings,
Bert Moonen
Storage Management
ABP Netherlands.
***************************************************************
This message and any attachments is solely for the intended recipient. If
you are not the intended recipient, disclosure, copying, use, or
distribution of the information included in this message is prohibited --
please immediately and permanently delete this message.
