Stormy, Have you tried deleting the existing .pwd files in the BA directory then running a manual and re-entering the info? If so, then I would recommend backing off to a 4.1 rev of the client. Also, as with any Netware problem, make sure you have the latest TSA nlms, tsa5up7 last time I checked.
Are you getting prompted for the Novell username and pwd, or the TSM one? I'm having a problem on our Netware cluster nodes that's similar, scheduled backups run for a couple of nights and then fail because of a prompt for the TSM userid and pwd. This seems to be a problem since I upgraded our server from 3.1.x to 4.1.4. Very frustrating. Stormy Maddux wrote: > I have three TSM 4.2.1 Netware 5.0 clients that won't perform a scheduled backup. > > Normally when you first setup the client and register the node, the first time it >prompts you to enter the Netware ID & password for the backup and stores the files. > > These three won't store the password. Every time you run a manual incremental or a >scheduled backup, you get prompted. > > The error shows as: > > 11/21/2001 19:36:57 ANS1880E TSA Connect error, > NWSMConnectToTargetService 'CTRL3' > password file 'CTRL3\SYS:TIVOLI/TSM/CLIENT/BA/TSM.PWD'. > Userid = 'adsm_support' > failed with cc = FFFDFFD7 > > When you try a manual backup, the dsmerror.log writes the same thing, and on the >screen you are prompted for the id & pw again. The TSM.PWD file gets updated with >the same date and time. > > The DSM.opt file is set for passwordaccess generate and nwpwfile is set to yes. > > Any ideas?? > > Thanks, > > Stormy Maddux > Systems Engineer > 650-599-1187 -- Jim Kirkman AIS - Systems UNC-Chapel Hill 966-5884