Brian,

I am unfamiliar with the technology in 9940 drives but you can try to
verify is the drive receiving stream of data or bursts (which can cause
rewind back and slowdown). Monitor both LAN and FC interface statistics to
be sure you are really sending data LAN-free.
Another question: according to my TSM v4.2 docs only Windows server
supports NamedPipes.
Are you correct that your TSM server is SunFire? If yes is the storage
agent communicating with the right server ? Or maybe SA fails and transfer
goes over LAN? Or if really goes through NamedPipe check is the data sent
to a Windows server and is this server the cause for low performance.

Zlatko Krastev
IT Consultant





"Scott, Brian" <[EMAIL PROTECTED]> on 18.12.2001 01:05:52
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To:     [EMAIL PROTECTED]
cc:

Subject:        Re: NamedPipe settings on W2K client

Zlatko,

This is SAN throughput. The NamedPipe setting is for the Storage Agent to
talk to the Backup/Archive client. We are writing to STK 9940 tape drives
and letting the tape drives do the compression.

Thanks,

Brian Scott
EDS - Enterprise Distributed Capabilities
MS 3278
Troy, MI 48098

* phone: 248-265-4596 (8-365)
* mailto:[EMAIL PROTECTED]



-----Original Message-----
From: Zlatko Krastev/ACIT [mailto:[EMAIL PROTECTED]]
Sent: Sunday, December 16, 2001 9:12 PM
To: [EMAIL PROTECTED]
Subject: Re: NamedPipe settings on W2K client


Where are you getting this throughput - LAN or SAN?
LAN-free storage agent transfer relatively small ammounts of metadata over
LAN and you cannot achive best possible peak rates there. For LAN data
transfer you should be able to achieve at least 7-8 MB/s so the problem
could be with TCP/IP settings not Named Pipes.
SAN throughput is limited by both tape drive and the application providing
the data stream. For filesystems this is the storage agent itself. But what
is the tape drive you are writting to and isn't it the bottleneck (LTO can
be too fast and constantly lose streaming)? Are you using client or tape
compression?

Zlatko Krastev
IT Consultant




"Scott, Brian" <[EMAIL PROTECTED]> on 14.12.2001 21:13:11
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To:     [EMAIL PROTECTED]
cc:

Subject:        NamedPipe settings on W2K client

Does anyone know if any NamedPipe performance settings?  We're running the
latest 4.2.x TSM B/A client on a Win2K box running LAN-free to a Sun
Microsystems Sunfire backup server (TSM 4.2.1.7). We've noticed that using
NamedPipe between the TSM Storage Agent and the TSM backup server is almost
twice as fast as traditional IP based but we're only able to get about 3 -
4MB/s throughput. Are there any settings pertaining to NamedPipe we can
use?

Thanks,

Brian Scott
Infrastructure Analyst
EDS - Enterprise Distributed Capabilities
MS 3278
Troy, MI 48098

* phone: 248-265-4596 (8-365)
* mailto:[EMAIL PROTECTED]

Reply via email to