Oh yes , there were no outstanding requests, I tried it with inserted tape and the message came very quick (and I tried it with no tape in, waiting for a message to insert the tape --> no difference) : 01/29/02 14:28:56 ANR2017I Administrator ADMIN issued command: BACKUP DB DEVCLASS=DAT TYPE=FULL VOLUMENAMES=vol001 SCRATCH=NO WAIT=YES 01/29/02 14:28:56 ANR0984I Process 4 for DATABASE BACKUP started in the FOREGROUND at 14:28:56. 01/29/02 14:28:56 ANR2280I Full database backup started as process 4. 01/29/02 14:28:57 ANR4571E Database backup/restore terminated - insufficient number of mount points available for removable media.
Chris > -----Ursprüngliche Nachricht----- > Von: Daniel Sparrman [SMTP:[EMAIL PROTECTED]] > Gesendet am: Dienstag, 29. Januar 2002 14:40 > An: [EMAIL PROTECTED] > Betreff: Re: Local DAT-Drive for UNLOADDB > > Hi > > Have you checked to see if you have any outstanding request using the q > req > command? Normally, this is the issue. > > We're you placed at the macine when you did all of theese commands? > Normally, a manual library ejects the volume after a process has > completed. > You didn't describe wethear or not you inserted the tape again. > > Best Regards > > Daniel Sparrman > ----------------------------------- > Daniel Sparrman > Exist i Stockholm AB > Bergkällavägen 31D > 192 79 SOLLENTUNA > Växel: 08 - 754 98 00 > Mobil: 070 - 399 27 51 > > > > > Christoph Pilgram > > <[EMAIL PROTECTED] To: > [EMAIL PROTECTED] > LHEIM.COM> cc: > > Sent by: "ADSM: Dist Stor Manager" Subject: > Local DAT-Drive for UNLOADDB > <[EMAIL PROTECTED]> > > > > > > 2002-01-29 14:41 > > Please respond to "ADSM: Dist Stor > > Manager" > > > > > > > > > > Hi all, > > on my testserver (AIX 4.3.3 / TSM 4.14 ) I tried to get the local > DAT-drive > as output-device for a test of unloaddb/loaddb going. > Defined a 'manuel library' called 'LOC_DEV' > Defined a 'manuel drive' called 'DAT1' pointing to '/dev/rmt0' with > Library > Name 'LOC_DEV' > Defined a '4mm device class' called 'DAT' with 'recording format ' DDS3C', > 'library name' = 'LOC_DEV' > > Labelling a volume with 'label libvol LOC_DEV vol001' seems to work : > > ANR2017I Administrator ADMIN issued command: LABEL LIBVOLUME LOC_DEV > vol001 > OVERWRITE=YES > ANR0984I Process 3 for LABEL LIBVOLUME started in the BACKGROUND at > 14:24:40. > ANR8799I LABEL LIBVOLUME: Operation for library LOC_DEV started as process > 3. > ANR8326I 002: Mount GENERICTAPE volume VOL001 R/W in drive DAT1 > (/dev/rmt0) > of library LOC_DEV within 60 minutes. > ANR0609I LABEL LIBVOLUME started as process 3. > ANR8372I 002: Remove GENERICTAPE volume VOL001 from drive DAT1 (/dev/rmt0) > of library LOC_DEV. > ANR8800I LABEL LIBVOLUME for volume VOL001 in library LOC_DEV completed > successfully. ANR0985I Process 3 for LABEL LIBVOLUME running in the > BACKGROUND completed with completion state SUCCESS at 14:27:38. > > Then I tried to make a dbbackup to the device class 'DAT', type 'FULL' on > volume 'vol001' an d got the following error : > > ANR2280I Full database backup started as process 4. > ANR4571E Database backup/restore terminated - insufficient number of mount > points available for removable media. > ANR0985I Process 4 for DATABASE BACKUP running in the FOREGROUND completed > with completion state FAILURE at 14:28:57. > > My question : where do I have to set the number of mountpoints other then > in > the the '4mm device class' or do I have enywhere else a wrong definition ? > > Thanks for help > > Chris > >