Hi again, OK, you checked SetHost, but did you issue the DisableCC command and reboot you SDG ? I found an old install doc I made during our install, and am positively sure it's the reason of your problem !
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= | Arnaud Brion, Panalpina Management Ltd., IT Group | | Viaduktstrasse 42, P.O. Box, 4002 Basel - Switzerland | | Phone: +41 61 226 19 78 / Fax: +41 61 226 17 01 | =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -----Original Message----- From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]] Sent: Thursday, 07 February, 2002 16:43 To: [EMAIL PROTECTED] Subject: Re: 3494 through SAN Data Gateway Hi Arnaud! I have issued the setHost 0,"aix" before installing the SAN Data Gateway. I checked the Fibre Channel settings through the IBM StorWatch SAN Data Gateway Specialist: The host type is set to AIX, so that shouldn't be the cause... Kindest regards, Eric van Loon KLM Royal Dutch Airlines -----Original Message----- From: PAC Brion Arnaud [mailto:[EMAIL PROTECTED]] Sent: Thursday, February 07, 2002 16:07 To: [EMAIL PROTECTED] Subject: Re: 3494 through SAN Data Gateway Hi Mr Loon, I could be false, be I believe I remember we had the same problem, until we updated values in the SDG, as said before : 1) disableCC 2) setHost 0, "aix" or setHost 0 AIX 3) setHost 1, "aix" or setHost 1 AIX 4) and reboot the device. 5) remove the tape drives (rmdev -dl rmt?), the fiber object (rmdev -Rdl fcs?), and then rerun cfgmgr. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= | Arnaud Brion, Panalpina Management Ltd., IT Group | | Viaduktstrasse 42, P.O. Box, 4002 Basel - Switzerland | | Phone: +41 61 226 19 78 / Fax: +41 61 226 17 01 | =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -----Original Message----- From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]] Sent: Thursday, 07 February, 2002 15:57 To: [EMAIL PROTECTED] Subject: Re: 3494 through SAN Data Gateway Hi *SM-ers! My 3590 drives are working through the SAN Data Gateway now. The problem wasn't related to the missing device package message, but it was a wrong SCSI cable (one without a terminator). However, I still receive the following message when running cfgmgr: cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed. devices.fcp.array I checked the AIX 4.3.3. CD, but it's not part of AIX. Could someone who is using a SAN Data Gateway check if he/she has this fileset installed? Maybe it is part of another fileset? I can't find anything about it, not through IBM nor though Google. Thanks in advance! Kindest regards, Eric van Loon KLM Royal Dutch Airlines -----Original Message----- From: Othonas Xixis [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 05, 2002 19:47 To: [EMAIL PROTECTED] Subject: Re: 3494 through SAN Data Gateway Eric, in case Adolph's recommendation don't work, or cfgmgr gives you another error then the problem is with your 2108 SAN Data Gateway (SDG). Go into the SDG (SAN Data Gateway) firmware and execute the following actions: 1) disableCC 2) setHost 0, "aix" or setHost 0 AIX 3) setHost 1, "aix" or setHost 1 AIX 4) and reboot the device. 5) remove the tape drives (rmdev -dl rmt?), the fiber object (rmdev -Rdl fcs?), and then rerun cfgmgr. This action should let see the SDG transparent to the cfgmgr routine. Cheers. Othonas Xixis "Loon, E.J. van - SPLXM" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 02/05/2002 01:00:33 PM Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc: Subject: Re: 3494 through SAN Data Gateway Hi Adolph! Thank you very much! I will install it tomorrow. Kindest regards, Eric van Loon KLM Royal Dutch Airlines -----Original Message----- From: Adolph Kahan [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 05, 2002 18:54 To: [EMAIL PROTECTED] Subject: Re: 3494 through SAN Data Gateway This is part of AIX. It will be on the AIX install CDs. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of Loon, E.J. van - SPLXM Sent: Tuesday, February 05, 2002 12:41 PM To: [EMAIL PROTECTED] Subject: 3494 through SAN Data Gateway Hi *SM-ers! I have just connected a 3494 library through a SAN Data Gateway. When I run cfgmgr is detects the drives: rmt5 Available 10-68-01 IBM 3590 Tape Drive and Medium Changer (FCP) rmt6 Available 10-68-01-4,0 IBM 3590 Tape Drive and Medium Changer (FCP) But it also returns the following error: cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed. devices.fcp.array This driver, is it a AIX driver or is it part of the TSM devices package? Thanks in advance!! Kindest regards, Eric van Loon KLM Royal Dutch Airlines ********************************************************************** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. **********************************************************************