Hi guys, I am in the situation whereby I have to think about DR soon, and need the best solution.
Here is the story so far:- I have a TSM Server on an RS/6000 plugged into a 3583 library on one site. The DR suite is 4 to 500 yards down the road. This has another RS/6000 with a second 3583 library plugged into it for HA purposes. What i need to be able to do, when the Primary Server fails over to the secondary Server (In a HA situation), is to get it to use the second library. Both of the two libraries are plugged into to mirrored ESS's, so both the RS/6000's should be able to see BOTH libraries. What I was thinking of doing was putting copy tapes into the second library, and onsite tapes into the first and utilising both librarys at the same time - can this be done?. If anyone could give me and pointers here as to the best approach or any possible OTHER approaches, then I would be forever in their debt!. Kind Regards, Roy Lake RS/6000 & TSM Systems Administration Team Tibbett & Britten European I.T. Judd House Ripple Road Barking Essex IG11 0TU 0208 526 8853 [EMAIL PROTECTED] This e-mail message has been scanned using Sophos Sweep http://www.sophos.com ********************************************************************** ------- IMPORTANT INFORMATION --------- This message is intended only for the use of the Person(s) ('the intended recipient') to whom it was addressed. It may contain information which is privileged & confidential within the meaning of applicable law. Accordingly any dissemination, distribution, copying, or other use of this message, or any of its contents, by any person other than the intended recipient may constitute a breach of civil or criminal law and is strictly prohibited. If you are NOT the intended recipient please contact the sender and dispose of this email as soon as possible. If in doubt please contact European IT on 0870 607 6777 (+44 20 85 26 88 88). This message has been sent via the Public Internet. **********************************************************************