IBM SAN Data Gateway supports IBM 3575. You can attach both 3575s to same SDG. For 3583 there is SDG module with 4 LVD ports which is field installable in the library (as an upgrade). It is cheaper than standalone product and does not occupy additional space. Both standalone and module versions are supported from hardware and software (TSM) point of view. And I personally had no problems with them. For TSM 4.1 you will have to replace SCSI TSM driver with FCP+SCSI one (which is well documented). For v4.2 and v5.1 there is no SCSI-only driver fileset. I do not know "TSM supported" FC/SCSI converter for HP DLT 4/40 but any which works with the library ought to work with TSM (statements on Tivoli site are somewhat fuzzy on this topic). Have in mind two issues: - not every SAN component is compatible with any other SAN component. For example IBM SDG (Pathlight) will for sure work with IBM 2109 (Brocade Silkworm) switches but AFAIK will not work with McDATA or Inrange Directors. - number of necessary FC adapters - 4 LTO + 2x4 3570 + 4x DLT ~= 288 MB/s with compression. So you will need at least 3 FC adapters.
Zlatko Krastev IT Consultant Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc: Subject: TSM and protocol converters I'm spec'ing a new TSM server. To avoid having to spend a fortune on a huge server just to get the I/O slots I need to support HV Diff SCSI, I'm thinking of using protocol converters to reduce the number of I/O slots in the new server. In other words, the server would provide Fibre Channel or Gigabit E or even LV Diff SCSi but I would connect my existing libraries via their HV Diff SCSI interfaces, with the protocol converter in the middle. Assuming this is technically feasible (and I know there are FC to SCSI converters) would TSM work in such an arrangement? What would change relative to simply plugging in a SCSI cable into the server as I have now? Server is "pSeries" or RS/6000; TSM is currently 4.1 but the new server would (very soon) enter service at 5.1. Thanks in Advance, Tab Trepagnier TSM Administrator Laitram Corporation