Hi Lindy This is quite dissicult to pinpoint. To rule out the drive - swap the two drives in the library, and set drive 2 offline in tsm, and test operation. If the drive is ok, there is a number of things to check - SCSI ID/cabling/termination TSM Drive configuration TSM DeviceDriverconfig Ultrium Drivers SCSI Adapter drivers Library Error logs
Somewhere in here you should find the problem. I haven't had the same problem myself, but it seems to me, that the most likely error is TSM misconfiguration. Are you sure about the SCSI ID/elementnumber and the TSM Device Driver config? Hope it helps... Rgds Geirr G. Halvorsen -----Original Message----- From: Crawford, Lindy [mailto:[EMAIL PROTECTED]] Sent: 15. oktober 2002 16:18 To: [EMAIL PROTECTED] Subject: Problem with 2nd LTO drive Hi TSMer's Please help.....I am running TSM 4.1 server on Windows 2000 and have an LTO 3583 library with two drives. We first installed the library with one drive and it worked perfectly.....we now have upgraded and added a 2nd drive and are experiencing problems......the second drive will load the tape, read ....but it can not unload the tape using TSM. Please help...any ideas...has some had the same problem...... Thanks in advance. > Lindy Crawford > Business Solutions: IT > BoE Corporate > > * +27-31-3642185 <<...OLE_Obj...>> +27-31-3642946 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> WARNING: Any unauthorised use or interception of this email is illegal. If this email is not intended for you, you may not copy, distribute nor disclose the contents to anyone. Save for bona fide company matters, BoE Ltd does not accept any responsibility for the opinions expressed in this email. For further details please see: http://www.boe.co.za/emaildisclaimer.htm