Go check out the PCI guide on the IBM web page for your machine. hdisk0 and hdisk2 are scsi internal hdisk1, hdisk5, hdisk14, hdisk4, hdisk8, hdisk11 are attached to one adapter and are probably in the same drawer but that is easier to tell in diag under task selection, ssa service aids, link verification obviously hdisk6, hdisk13, hdisk3, hdisk7, hdisk9, hdisk10, and hdisk12 are on the other adapter probably in the same drawer also.
-----Original Message----- From: Justin Bleistein [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 27, 2002 12:50 PM To: [EMAIL PROTECTED] Subject: devices and location code question in aix Below is output of an "lsdev" command in AIX. Anyone have any good documentation or can someone sum up for me how to physically locate these disks/adapters physically in the system by these location codes in this output. Can anyone make sense out of this. I am mainly interested in PCI readings for obvious reasons. Any input would be appreciated thanks! # lsdev -Cc disk hdisk0 Available 40-60-00-4,0 16 Bit SCSI Disk Drive hdisk1 Available 11-08-L SSA Logical Disk Drive hdisk5 Available 11-08-L SSA Logical Disk Drive hdisk6 Available 21-08-L SSA Logical Disk Drive hdisk13 Available 21-08-L SSA Logical Disk Drive hdisk14 Available 11-08-L SSA Logical Disk Drive hdisk2 Available 40-60-00-8,0 16 Bit SCSI Disk Drive hdisk3 Available 21-08-L SSA Logical Disk Drive hdisk4 Available 11-08-L SSA Logical Disk Drive hdisk7 Available 21-08-L SSA Logical Disk Drive hdisk8 Available 11-08-L SSA Logical Disk Drive hdisk9 Available 21-08-L SSA Logical Disk Drive hdisk10 Available 21-08-L SSA Logical Disk Drive hdisk11 Available 11-08-L SSA Logical Disk Drive hdisk12 Available 21-08-L SSA Logical Disk Drive --Justin
