Does it fail on the same file or directory every time, and does that file or directory attract a management class which is pointing to a different storage pool
"Conko, Steven" <[EMAIL PROTECTED]> on 12/18/2002 02:29:12 PM Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc: (bcc: John Naylor/HAV/SSE) Subject: Re: Idle system fails with Media mount not possible The strange thing as that other clients are backing up fine... these are three very similar, nearly identical clients, all configured exactly the same. the others backup fine, and this incremental keeps failing in the same spot with the media mount not possible. -----Original Message----- From: Robert L. Rippy [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 18, 2002 9:12 AM To: [EMAIL PROTECTED] Subject: Re: Idle system fails with Media mount not possible I've also seen this where Unix hasn't released the drives from the OS. TSM seems them as available but not Unix. I have had to delete the drive and redefine so that they can be used. It was a bug in a certain code of TSM but I can't remember which one or even if that is truly your problem. Thanks, Rob. From: "Conko, Steven" <[EMAIL PROTECTED]> on 12/18/2002 09:03 AM Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc: Subject: Re: Idle system fails with Media mount not possible the client was already set to 2 mount points. the storage pool does not fill up. any other suggestions? -----Original Message----- From: Robert L. Rippy [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 18, 2002 7:47 AM To: [EMAIL PROTECTED] Subject: Re: Idle system fails with Media mount not possible Query the node with F=d and change Number of Mount points from 0 to at least number of drives you have in library. What happened is stgpool probally filled up and the backup tried to continue on tape, but with Number of Mount points set to 0 said no and it failed. Thanks, Robert Rippy From: "Conko, Steven" <[EMAIL PROTECTED]> on 12/17/2002 04:19 PM Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc: Subject: Idle system fails with Media mount not possible strange one... and ive looked at everything i can think of. In client dsmerror.log: 12/17/02 15:01:54 ANS1228E Sending of object '/tibco/logs/hawk/log/Hawk4.log' failed 12/17/02 15:01:54 ANS1312E Server media mount not possible 12/17/02 15:01:57 ANS1312E Server media mount not possible In activity log: ANR0535W Transaction failed for session 1356 for node SY00113 (AIX) - insufficient mount points available to satisfy the request. There is NOTHING else running on this TSM server. All 6 drives are online. The backup is going to a 18GB diskpool that is 8% full, there are plenty of scratch tapes, i set max mount points to 2. keep mount point=yes. it starts backing up the system then just fails... always at the same point. the file its trying to back up does not exceed the max size. all drives are empty, online. diskpool is online. i see the sessions start and then just after a minute or 2 just abort. any ideas? ********************************************************************** The information in this E-Mail is confidential and may be legally privileged. It may not represent the views of Scottish and Southern Energy plc. It is intended solely for the addressees. Access to this E-Mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Any unauthorised recipient should advise the sender immediately of the error in transmission. Scottish Hydro-Electric, Southern Electric, SWALEC and S+S are trading names of the Scottish and Southern Energy Group. **********************************************************************