That's life, now I saw you are true, but I didn't presume problems like this, so I didn't check the list. :-)) Tom
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Zlatko Krastev/ACIT Sent: Friday, January 10, 2003 9:49 AM To: [EMAIL PROTECTED] Subject: Re: LTO 3583 V2_80_41 firmware issue You was able to save the time yourself. This was discussed widely on the list two months ago. Look the posts: 09.11.2002 - "Re: 2.8.0.41 for 3583 (was q libv just stopped working?)" 11.11.2002 - "warning: before you update fw V2_80_41 of IBM 3583 library, read this first please!!!" Zlatko Krastev IT Consultant Toma? Hrouda <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 10.01.2003 09:49 Please respond to "ADSM: Dist Stor Manager" To: [EMAIL PROTECTED] cc: Subject: LTO 3583 V2_80_41 firmware issue Hi all, I would like to save time of all of you in case of upgrading LTO 3583 firmware to 2_80_0041 level. I did it two days ago from 2_72_0012 and with unpleasant surprise. Tape labels readed from barcodes are with default settings in 2_80_0041 WITHOUT trailing "L1" characters. When I restarted TSM server and performed first AUDIT LIBRARY, whole tapes gone out and new checked labels were 6 characters long and unknown for TSM (using tapes). There is new item in library menu: MORE - SETUP - LIBRARY - MEDIA, which has default value NORMAL (providing 6 characters label) and must be set to EXTENDED for full label providing. Very unlucky default setting, it counted three hours of my life at cunstomer with rising hair on my head, when I had no "known" volumes in library. Tom