Hi Chris,
the library should be controlled by the TSM SCSI driver, the tape drives, if
they are LTO, should be controlled by the native drivers.
In the MMC right click on the properties of the tsm driver and move the library
to the left, to devices controlled by TSM, rebbot and all should be fine.
Best Regards
Markus Veit
An: [EMAIL PROTECTED]
Kopie:
Thema: tsm device driver does not
start on boot !
[EMAIL PROTECTED]
Received : 22.01.2003
11:19
Bitte antworten an "ADSM:
Dist Stor Manager"
Hi all
I'm implementing a new TSM server on win2k. Its attached to 2 3584 tape
libraries with 10 drives.
Server is at SP3
TSM Server is at 5.1.5.4
adsmscsi is at 5.1.5.8
The problem I'm getting is on reboot of the server. The TSM device driver
does not start, even though it is set to boot, which means the 3584
libraries can not be initialised. When I start the device driver manually it
comes up and the libraried are initialised. I do not have any problems with
the tape drives that are controlled by the native device drivers.
In the windows event log it shows the message that the Adsmscsi failed to
start with an event id of 7026.
Has anyone seen this before? Any thoughts?
Regards
Chris
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
