I have done a significant amount of testing and have quite a lot of practical experience with what I will refer to as the Big Three tape technologies:
AIT3 LTO1 SDLT320 Of the three, I know AIT the best. It's always good to know where someone sits before they tell you where they stand. In a TSM environment, all three of these technologies perform very similarly: within 10-15% of each other. Don't let the manufacturer's performance claims sway your decision. Backup is generally not about the hardware but more about the software. TSM is quite powerful, but often trades power for speed. Remember, we have a sophisticated database running here to track what's going on. For all three drives, we are able to sustain between 35 and 45 GBytes per hour during storage pool to storage pool operations. For instance, migration from Disk to Tape or Backup stg tape to tape. In addition, you can expect to see about the same performance when clients are writing data directly to tape (or even multiple tapes simultaneously while using the stg pool parameter copystgpool). When sizing an environment, use the 35 GB/Hour number and you won't be unhappy. As for reliability. That turns out to be a very mixed bag. I have seen sites with high volumes of data and no errors or problems with all three and I have seen sites with numerous problems. The problems seem to be mostly related to drive firmware levels and tape batches. Once the drive firmware is correct and bad tapes are eliminated, most sites settle down nicely. The more complex the environment, the more likely the problems. For instance, we have a site with a large fiber channel and LTO configuration. No end to the problems so far and they are very serious problems. Is this a result of the tape technology? I doubt it, but one never knows, do one?\ Due to the nature of AIT3, I would suspect that overall reliability numbers will be lower than for LTO and SDLT, but my hands-on experience doesn't show that. As for Automation. There are gazillions of libraries for each technology. Clear winners in my opinion are Qualstar and perhaps IBM. I give the IBM libraries a "perhaps" as we have had very good experience with the 349x libraries and only limited experience with 3584. These seem OK, but not much experience. The lower end IBM libraries are based on someone else's technology so I would think one might get a better deal buying direct from that manufacturer. Compatibility with previous technology. Some DLT bigots are SDLT bigots because they believe in investment protection. I think that's balderdash as very few people would ever try to read a DLT tape with an SDLT drive anyway so what difference does it make? All three of these are relatively new technologies and you are going to switch to one anyway, so investigate all three. The all important Kelly recommendation: For value, AIT3 is unsurpassed: very good performance, relatively inexpensive, great automation, manufactured by one company so technology is first rate. For openness (or perceived openness) LTO: excellent performance, reasonably priced, so-so automation, standards based and built by more than one manufacturer (but how many of us are going to buy from more than one anyway and if you attend presentations by each one about their LTO product you come away from each one in succession thinking you have found the best, i.e., they all lie equally convincingly (probably shouldn't have two "ly" words in the same sentence)). For perceived technical excellence, SDLT: Quantum has very neat technology in their drives. Does it matter much? Probably not, but cool anyway. So: For the price conscious: AIT3 going to AIT4 when available. If you're an Open kind of dude: LTO If you believe in Quantum: SDLT. They offer a very good product IMHO. LTO and SDLT will be very close in price so go with your gut. As always, study, study, study. Get input from those you respect. Choose wisely and then get and stay behind your choice. STORServer supports all three technologies equally. Views expressed here are my own. Kelly J. Lipp STORServer, Inc. 485-B Elkton Drive Colorado Springs, CO 80907 [EMAIL PROTECTED] or [EMAIL PROTECTED] www.storsol.com or www.storserver.com (719)531-5926 Fax: (240)539-7175 -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Colby Morgan Sent: Thursday, February 13, 2003 3:24 PM To: [EMAIL PROTECTED] Subject: Tape Reliability Recommendations We are currently running TSM 5.1.5 on Win2k with an IBM Mammoth-2 drive for offsite copypools. We have had problems with both our onsite M2 and offsite M2 drives at our disaster recovery center. IBM has replaced the drive more than a dozen times in the last two years and Exabyte has replaced countless tapes. Most recently we are experiencing a high rate of media write failures on a newly replaced drive as well as media read failures in DR testing, both using brand new 225m AME media. Is anybody else out their running an IBM/Exabyte Mammoth-2 drive and if so what kind of results do you see? My real question is what is the most common/reliable removable tape technologies for the Intel TSM environment? We are considering switching technologies and I wanted to solicit testimonies on other technologies (DLT, LTO, SDLT,etc...). We currently copy around 135GB to 300GB offsite daily. Thanks, Colby