F27E, F295 and F298 - all from our CE - you need at least F27E for 3590H's to work at all.
-----Original Message----- From: Bob Booth - UIUC [mailto:[EMAIL PROTECTED] Sent: 07 March 2003 15:00 To: [EMAIL PROTECTED] Subject: Re: 3590 microcode You were in the right place. D01F.26E is the latest on the site. Unfortunately, the documentation is not up to date. I have also heard of newer code for the 3590, but it is not on any ftp site. You may have to ask your CE to get an FMR tape for you. bob On Fri, Mar 07, 2003 at 08:52:41AM -0500, Steve Roder wrote: > Hi All, > > With all the recent discussion here about I/O errors on tapes being > the result of downleveled microcode, I went looking for the latest 3590E > code, and all I could find was level 350, which we installed 15 months > ago. Can anyone point me at a download site for the newest code? I tried > ftp.software.ibm.com, but 350 was the latest, and service2.boulder.ibm.com > has none at all, even though I got redirected there. > > Thanks, > > > Steve Roder, University at Buffalo > HOD Service Coordinator > VM Systems Programmer > UNIX Systems Administrator (Solaris and AIX) > TSM/ADSM Administrator > ([EMAIL PROTECTED] | (716)645-3564) Any e-mail message from the European Central Bank (ECB) is sent in good faith but shall neither be binding nor construed as constituting a commitment by the ECB except where provided for in a written agreement. This e-mail is intended only for the use of the recipient(s) named above. Any unauthorised disclosure, use or dissemination, either in whole or in part, is prohibited. If you have received this e-mail in error, please notify the sender immediately via e-mail and delete this e-mail from your system.
