> -----Original Message-----
> From: GUILLAUMONT Etienne [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, March 19, 2003 1:57 AM
> To: [EMAIL PROTECTED]
> Subject: Problem with a library
>
> The manuals say to issue an audit library but if I try it, I
> still get the same messages. I tried to halt and restart TSM
> but it changed nothing. I
> also tried to checkout some libvolumes but even with the
> remove=no option, it didn't change anything.
> I also removed manually the LOTA03 tape but still nothing changes.
>
> What can I do to rebuild the content of my library and what
> does that message mean ?
I had this problem recently on a different library (Adic Scalar 100), and opened a
ticket with TSM support. We were informed that it was due to the fact that we added
new hardware to the system (we had added 2 drives) and that the paths from the server
to the library were now incorrect. We were instructed to remove the drives and all of
their paths from the system, and to re-add them. Unfortunately, now we are running
into a problem with the library as well.
If a simple audit library doesn't work, you might try removing the drive definitions
and redefining them. Then try your audit again.
If anyone has any reason why this would not be a good idea, please let me know!
Thanks.
Peter
Peter Ford
System Engineer
Stentor, Inc.
5000 Marina Blvd,
Brisbane, CA 94005-1811
Main Phone: 650-228-5555
Fax: 650 228-5566
http://www.stentor.com
[EMAIL PROTECTED]
