The library you are using is reading the "extended" version of the LTO barcode (the
bit with the "L1" in it). You need to change the way the library reads the barcode
from "extended" to "normal".
P.S. This probably also means that your DR provider is not using the latest microcode
on the library.
--
Mark Stapleton
-----Original Message-----
From: Tom Kauffman [mailto:[EMAIL PROTECTED]
Sent: Fri 7/11/2003 10:13 AM
To: [EMAIL PROTECTED]
Cc:
Subject: Re: Loading DR tapes into an automated library
Mike --
I've never seen this; no clues, unfortunately. Would these be the "L1" code
at the end of the barcode label?
This is the point where I'd drag in the local D/R site support people and
also consider a call to Tivoli support.
And, the way we run D/R tests here, we would set this issue up as a primary
objective for the next D/R test (a "Primary Objective" that we cannot make
work becomes a D/R test failure that shows up in a LARGE number of reviews).
Tom Kauffman
NIBCO, Inc
-----Original Message-----
From: Michael Swinhoe [mailto:[EMAIL PROTECTED]
Sent: Friday, July 11, 2003 9:50 AM
To: [EMAIL PROTECTED]
Subject: Re: Loading DR tapes into an automated library
Tom,
I can now check the tapes in but our barcodes are 6 digits and when I
checked the tapes in as scratch it has tagged 2 extra digits onto the end.
Do you know how to resolve this?
Thanks,
Mike.
Regards,
Michael Swinhoe
Storage Management Group
Zurich Financial Services
E-mail: mailto:[EMAIL PROTECTED]
Tom Kauffman
<[EMAIL PROTECTED] To: [EMAIL PROTECTED]
BCO.COM> cc:
Sent by: Subject: Re: Loading DR tapes
into an automated library
"ADSM: Dist
Stor Manager"
<[EMAIL PROTECTED]
RIST.EDU>
11/07/2003
15:02
Please
respond to
"ADSM: Dist
Stor Manager"
What do you mean "Refusing to read"?
We did this earlier this year.
Try this:
1) Open the library
2) Insert your tapes
3) close the library
4) wait for the initialization to finish
5) Use the front-panel controls to query the library - should show the
number of tapes
6) use the front panel controls to move a tape by volser and see if you get
a list of your tapes
If #6 works, the library read your barcodes; if not, your D/R site provider
needs to investigate what's wrong.
7) within TSM, "Audit library <libname> checklabel=barcode
8) Checkin libv <libname> search=yes status=scratch checklabel=barcode
9) Checkin libv <libname> search=yes status=private checklabel=barcode
For 7 thru 9 to work, your library definitions need to be correct in TSM,
and I'm not sure how that works in a Win2K envirnment as our TSM server is
AIX.
HTH --
Tom Kauffman
NIBCO, Inc
-----Original Message-----
From: Michael Swinhoe [mailto:[EMAIL PROTECTED]
Sent: Friday, July 11, 2003 8:21 AM
To: [EMAIL PROTECTED]
Subject: Loading DR tapes into an automated library
Importance: High
Hi,
I need help. I am on the last day of DR and wanted to try loading our
LTO tapes into the automated LTO library, that the DR providers have as we
are sick of loading the tapes manually? Anyway the library is refusing to
read our barcodes even though it is the exact same library we have back at
base. I would be very grateful if someone can shine some light?
TSM 5.1.5 (W2K)
IBM LTO 3584
8 * LTO 3580 drives
IBM tapes.
Cheers,
Mike.
Regards,
Michael Swinhoe
Storage Management Group
E-mail: mailto:[EMAIL PROTECTED]
-------------------------------------------------------------------------
The information contained in this message is confidential and may be
legally privileged. If you are not the intended recipient, please do not
read, copy or otherwise use it and do not disclose it to anyone else.
Please notify the sender of the delivery error and then delete the
message from your system.
Any views or opinions expressed in this email are those of the author only.
Communications will be monitored regularly to improve our service and for
security and regulatory purposes.
Thank you for your assistance.
-------------------------------------------------------------------------
