Later, Thanks a lot! I read the README.SRV. There is hope now:) I will try it this evening.
Bill --- Rejean Larivee <[EMAIL PROTECTED]> wrote: > Hello Bill, > support for LTO Generation II drives was added > in the 5.1.6.1 level of the server. This is > described > in the server README file. > Once at a supported level, delete and redefine > the drives in TSM so they are properly recognized > as LTO II drives. They are most likely recognized > as "generic" drive now which would be the cause > for the ANR0535W message. > Later, > ----------------------------------------------------------------- > Rejean Larivee > IBM TSM/ADSM Level 2 Support > Phone : (506) 638-7103 Tieline: 710-7103 Fax : > (506) 638-7209 > Email : [EMAIL PROTECTED] > > > > Bill Zhang > <[EMAIL PROTECTED] To: > [EMAIL PROTECTED] > M> cc: > Sent by: "ADSM: > Subject: media mount not possible > Dist Stor > Manager" > <[EMAIL PROTECTED] > .EDU> > > > 09/15/2003 09:13 > AM > Please respond to > "ADSM: Dist Stor > Manager" > > > > > > > hi all > > TSM Server 5.1.5 > Client 5.1.5 > AIX 5100-04 > Tape Library 3584 with 4 3580 drives > > I have 15 LTO 2 tapes in the library. > I used Webadmin GUI to label the tape thinking they > are checked in also, becuase I can see them in the > Library Volumes window. > > I set the "MAX number allowed scratch wolume" to 15 > for the tape pool 3584TAPEPOOL1. > > mount limit is DRIVES > > When I tried to make a full backup, it pop up a > message > "server media mount not possible" and in the log, it > says > > ANR0535W insufficient mount points available to > satisfy the request. > > I don't know what is wrong. > > many thanks for your help > > Bill > > __________________________________ > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site > design software > http://sitebuilder.yahoo.com __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com