Has anyone had any luck mixing LTO1 and LTO2 Drives in an IBM3583. We have installed it at one of the sites and it worked for a week and then just stopped working. We are working with IBM Hardware, Software (Developers who write the Drive microcodes and TSM for about 4 months now without any progress).
Any help is appreciated. Rajesh Oak Blue Cross Blue Shield of Michigan 313-225-8086 -- --------- Original Message --------- DATE: Thu, 10 Jun 2004 15:16:46 From: "Warren, Matthew (Retail)" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Cc: >... > >You can actually mix lto media and drives without partitioning the >library at 5.2. We have roughly 1/2 & 1/2 LTO1 and LTO2 media, with 12 >LTO1 and 12 LTO2 drives all in the same 3584. We also have two servers >acting as library client/manager pairs to each other and utilise storage >pools of both device classes remotely as well as locally. > >We have 2 device classes defined, each with a mount limit of 12, where >you have to be carefull is that you don't specify a FORMAT of 'drive', >rather you have to specify ultrium/ultriumc or ultrium2/ultrium2c. > >Matt. > >-----Original Message----- >From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of >Stapleton, Mark >Sent: Thursday, June 10, 2004 3:12 PM >To: [EMAIL PROTECTED] >Subject: Re: LTO1 tapes in LTO2 drives > >From: Cynthia Leon [mailto:[EMAIL PROTECTED] >>I am also getting ready to add 2 LTO2 drives to a library that >>has 10 LTO1 >>drives. I have been told by IBM that I must partition my 3584 >>and define 2 libraries. Is this true? > >From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On >Behalf Of Steve Hartland >>If you are using TSM 5.2 or higher, you can define 2 >>device classes instead of partitioning the library. > >Steve-- > >How do you associate two different devices classes to one library? > >-- >Mark Stapleton > > >___________________________ Disclaimer Notice __________________________ >This message and any attachments are confidential and should only be read by those to >whom they are addressed. If you are not the intended recipient, please contact us, >delete the message from your computer and destroy any copies. Any distribution or >copying without our prior permission is prohibited. > >Internet communications are not always secure and therefore the Powergen Group does >not accept legal responsibility for this message. The recipient is responsible for >verifying its authenticity before acting on the contents. Any views or opinions >presented are solely those of the author and do not necessarily represent those of >the Powergen Group. > >Registered addresses: > >Powergen UK plc, Westwood Way, Westwood Business Park, >Coventry CV4 8LG. >Registered in England & Wales No. 2366970 > >Powergen Retail Limited, Westwood Way, Westwood Business Park, >Coventry CV4 8LG. >Registered in England and Wales No: 3407430 > >Telephone +44 (0) 2476 42 4000 >Fax +44 (0) 2476 42 5432 > ____________________________________________________________ Find what you are looking for with the Lycos Yellow Pages http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10