Too much informative ! By the way: in the same discussion thread can we discuss my scenario which is going to be under implementation soon?
1- How would I configure TSM server to put its Primary and copy storage pools on NetApp NAS? There is no Tape library in the project. What I did was that I created a map using iSCSI Initiator on Windows 2k and then used this added hard disk of NAS to keep my database, logs and primary storage pool. What I am thinking is: that can we configure TSM directly to keep its data on NAS directly instead of adding a NAS volume on my win2k TSM Server Operating system and then use it? Also can you please elaborate a little on DataMover? Best Wishes ! Sadi _ TSM_User <[EMAIL PROTECTED] OM> To Sent by: "ADSM: Dist Stor [EMAIL PROTECTED] Manager" cc <[EMAIL PROTECTED] .EDU> 07/15/2004 04:03 AM Subject Re: How to setup GUI to access NDMP TOC for DAR? Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] .EDU> We just tested this today. The TSM Client Manual for Windows has more details but we did the following: In the dsm.opt file we added: nasnodename = NetAppName (Celrra Name in your case) domain.nas = all-nas include.nas.fs MgmtClassName >From there you need to stop and start the client acceptor service. When you connect to the web client http://servername:1581 you will now see your regular node name and your NAS node name. Under the NAS node you can click down through its file system. A note, we use the DIRMC option in our dsm.opt files. We registered our NAS node and our regular client in 2 different policy domains. Well, the web client kept failing with a protocol error. We looked at the dsmerror.log and it kept saying that we had an invalid mgmt class with the DIRMC option. When we connect with the dsmc command line and we didn't reciever any errors. When we issued the command q filespace -class=nas we then saw that the error was occuring when reading the NAS data. So we created the mgmtclass in the NAS domain and everything worked from there on. This was odd of course because I don't think the NAS backup needs the DIRMC but that was what we found. Everything we did was with a V5.2.3 server on Windows 2000 and the V5.2.3 client on that same windows 2000 server. Also, when you want to restore a file to an alternate location you can only choose a different volume. We wanted to restore /vol/data/user1/test.txt to /vol/data/restore. There was no option to pick a different folder only a different volume on the NetApp. We ran one test to see what would happen if you tried to restore from something that you didn't create a TOC for. You see the filespace but when you click on it it doesn't have anything below it. That is what you would expect I guess but just note that you will still see the filespace. For production we are going to backup the server using TSM server admin schedules. We realize that you can backup data from a dsmc command. We are going to test that tomorrow but at this time it doesn't look like we are going to use that. Our current backups are going to an IBM 3583 with LTO1 drives directly connected via LVD SCSI to the NetApp. We were able to spin both drives around 50 GB/hr each. We are going to test a backup to Fibre 9840 soon using an ACSLS library definition which we hope to get better throughput on. Robert Clark <[EMAIL PROTECTED]> wrote: I've been testing NDMP backups using the datamover of an EMC Celerra writing to a SAN attached 3494. I needed to read between the lines in the docs a bit to figure out to set it up, but its working. But I don't see any info on how to setup a W2K B-A GUI so that it will read the TOC(table of contents) and allow for DAR(direct access restore) of the Celerra. (This seems to be how it needs to work, based on reading the current "TSM Admin Guide (for AIX)".) Do I need the "NAS" portion of the B-A client installed, even though the system I have the W2K GUI on doesn't have access to the NAS portion of the Celerra? I've added a "nasnode" line to the dsm.opt, but the client still doesn't show an entry for the Celerra in the GUI. Any hints or pointers to pertinent docs appreciated. Thanks, [RC] ============================================================================== IMPORTANT NOTICE: This communication, including any attachment, contains information that may be confidential or privileged, and is intended solely for the entity or individual to whom it is addressed. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message is strictly prohibited. Nothing in this email, including any attachment, is intended to be a legally binding signature. ============================================================================== --------------------------------- Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers!