This would be true, Daniel, if Pawel were using AIX on his TSM server. However, he commented that he was using Windows...
-- Mark Stapleton ([EMAIL PROTECTED]) IBM Certified Advanced Deployment Professional Tivoli Storage Management Solutions 2005 Office 262.521.5627 >-----Original Message----- >From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On >Behalf Of Daniel Sparrman >Sent: Monday, May 09, 2005 6:32 AM >To: ADSM-L@VM.MARIST.EDU >Subject: Re: problems with medium changer driver in 3583 > >You will need to install the IBM Atape driver, which you can >find here: >ftp://ftp.software.ibm.com/storage/devdrvr/. > >You cannot use the TSM device driver for IBM equipment. > >Best Regards > >Daniel Sparrman >----------------------------------- >Daniel Sparrman >Exist i Stockholm AB >Propellervägen 6B >183 62 TÄBY >Växel: 08 - 754 98 00 >Mobil: 070 - 399 27 51 > > > >Otto Schakenbos <[EMAIL PROTECTED]> >Sent by: "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> >2005-05-09 13:27 >Please respond to >"ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> > > >To >ADSM-L@VM.MARIST.EDU >cc > >Subject >Re: problems with medium changer driver in 3583 > > > > > > >not sure about windows but in linux/unix there is the tsmscsi driver >that you use for all library's except IBM library's. If you have a ibm >library you need to use a special driver that only works with ibm >library's. (IBMtape or something) > >maybe you are using the generic driver instead of the ibm driver? > >regards > >Otto Schakenbos >System Administrator > >TEL: +49-7151/502 8468 >FAX: +49-7151/502 8489 >MOBILE: +49-172/7102715 >E-MAIL: [EMAIL PROTECTED] > >Teleflex Holding GmbH >Corporate IT Europe >Fronackerstrasse 33-35 >71332 Waiblingen >GERMANY > > > > >Pawel Jobkiewicz wrote: > >>Hi! >> >>I have server 2003 SP1 with TSM 5.3.1.1 and library IBM Ultrium 3583 >connected to this server via FC. I've installed drivers to the tapes >without any problem, but I can't install correctly meduim >changer. I've >installed "TSM drivers for medium changer - tsmscsi.sys". But >in Windows >Device Manger next to this device there is an exlamation mark and in >propertis there is note that "windows can't load all drivers. >code 31" My >TSM see only tape drivers. I can't define path to the library. I don't >know what's wrong, I did everything what is said in user guide. >>What's the problem? Can anybody help me? >>Thanks >>Pawel >> >> >