It would also be helpful to know what revision levels your server is at. Do you have any 6.5 service packs applied? Any of the TSA or TCP updates? What settings are you using when you load tsafs (look in sys:\etc\sms\tsa.cfg), and are you using "ResourceUtilization" or any other performance setttings in your dsm.opt? You might also want to check your server's tcp settings to make sure that TCP Delayed Ackknowlegement is off. As has been mentioned already, it's also very possible that there is something wrong in the nic/switch setup. There is no "always right" answer as to how they should be configged. Some nic/switch combos work best with both hardcoded, some with both on auto, and some with one hardcoded/one on auto. I would also make sure you're running the newest version of the nic driver. Troy Frank Network Services University of Wisconsin Medical Foundation 608.829.5384
>>> [EMAIL PROTECTED] 10/11/2005 6:30:04 AM >>> Guys, Thanks for the info, I'll double check the network settings. Though I have changed the COMMtimeout value from 180secs to 1800 secs as suggested by Richard Simms, which has stopped the session restart error messages and infact the backup seems to be error free. As for the speed, I'm still leaning towards a tsm netware client/ Netware OS issue. I say this because last night I performed a test backup on a 10gig volume (50% full) that hadn't had any changes and it still took 10 hours to scan only 80000 odd files. The Client itself hovered around 87-89% utilisation. When this server was netware 6.0 it used to flatline on 100% when performing a backup with the same slow performance. We thought once we'd upgraded to 6.5 with the additional memory required with 6.5, that performance would improve. Unfortunately it hasn't yet. Has anyone experienced this before? Regards Cameron Richard van Denzel <[EMAIL PROTECTED] To NL> ADSM-L@VM.MARIST.EDU Sent by: "ADSM: cc Dist Stor Manager" Subject <[EMAIL PROTECTED] Re: Slow backup performance .EDU> 07/10/2005 07:25 PM Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] .EDU> Oops, I don't know if there is an iperf for Netware. Do other clients have the same problems from the network the NW server is on? Also you did not specify what kind of network is between server and client(s) (100Mb/1000Mb)? Met vriendelijke groet, With kind regards, Richard van Denzel. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Leigh Reed Sent: vrijdag 7 oktober 2005 10:37 To: ADSM-L@VM.MARIST.EDU Subject: Re: Slow backup performance If you have already checked this and it is very obvious to you, please don't be offended, but it has been a very common occurrence throughout the life of network backups. Have you checked that your NIC is hard coded to 100MB Full Duplex and your switch is also the same. You could also check if your switch is showing any CRC errors. Lastly, try an FTP from client server to TSM server to establish if the network is performing outside of TSM. Again, if I'm teaching you to suck hen produce, apologies. Leigh -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Cameron Ambrose Sent: 07 October 2005 07:42 To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Hello, We're currently experiencing backup failures/extreme slowness on a Netware 6.5 SP2 server TSM Client 5.3.0 TSM Server 5.2.0 TSA's up to date as recommended by Client Doco Client Logs 10/05/2005 14:43:19 ANS1809W Session is lost; initializing session reopen procedure. 10/05/2005 14:43:19 ANS1809W Session is lost; initializing session reopen procedure. 10/05/2005 14:44:15 sessRecvVerb: Error -50 from call to 'readRtn'. 10/05/2005 14:44:15 ANS1999E Incremental processing of 'SYS:' stopped. 10/05/2005 14:48:24 ANS1999E Incremental processing of 'INF:' stopped. 10/05/2005 14:48:25 ANS1017E Session rejected: TCP/IP connection failure Server Logs 10/05/05 14:39:53 ANR0481W Session 2177 for node SERVERNAME (NetWare) terminated - client did not respond within 180 seconds. 10/05/05 14:41:10 ANR0406I Session 2178 started for node SERVERNAME (NetWare) (Tcp/Ip xxx.xxx.xxx.xxx(19578)). Currently we have had a backup running for 24 hours and all that has been transfered is 4.19 gig and 255,000 files scanned. Has anyone else experienced similar issue's Any help on this would be appreciated Regards Cameron Confidentiality Notice follows: The information in this message (and the documents attached to it, if any) is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken, or omitted to be taken in reliance on it is prohibited and may be unlawful. If you have received this message in error, please delete all electronic copies of this message (and the documents attached to it, if any), destroy any hard copies you may have created and notify me immediately by replying to this email. Thank you.