We just started to experience this after upgrading TSM server to 5.3 16.....the eject is failing after a 1 second wait. (as others have noted, the tapes are ejected but remain in 'mountable' state). We have a problem open......but no answers from IBM yet. Has anyone figured out how to adjust ACSLS timeout value on the TSM side ??? (FYI, we've had STK review a trace, and everything is fine on that side.....it's just that TSM is only waiting 1 second before failing the eject...)
Thanks..... Dave Zarnoch <[EMAIL PROTECTED] PROVIDENT.COM> To Sent by: "ADSM: ADSM-L@VM.MARIST.EDU Dist Stor Manager" cc <[EMAIL PROTECTED] DU> Subject Re: [ADSM-L] DR tapes not changing states 10/19/2005 11:34 AM Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] DU> Yeah... We just ran a test and confirmed that if you immediately remove the tapes, TSM changes the state. Unfortunately, we got an I/O error from ACSLS before we removed them the first time so TSM never changed the state Must be a way to change the ACSLS time-out? Dave Zarnoch Nationwide Provident [EMAIL PROTECTED] W 302-452-4197 C 302-462-8703 Gerald Michalak <[EMAIL PROTECTED] To: ADSM-L@VM.MARIST.EDU COM> cc: Sent by: "ADSM: Subject: Re: [ADSM-L] DR tapes not changing states Dist Stor Manager" <[EMAIL PROTECTED] .EDU> 10/19/2005 11:13 AM Please respond to "ADSM: Dist Stor Manager" I've seen this before with ACSLS, and TSM doesn't finish the move, and change the status, until the tapes are removed from the CAP slots on the library. Gerald Michalak 630-691-4819 pager 800-759-8352 # 1076423 AIX - Certified Support Technician "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 10/19/2005 09:13:23 AM: > Folks, > > We are in the process of moving from a l700 StorageTek lib > to a l8500 lib using ACSLS and doing some testing. > > When we issue the following command: > > MOVE DRMEDIA * wherest=mo tost=va cmd=&VOL w=n rem=Untileefull cap=0,1,0 > > The system responds: > > 10/19/05 05:50:37 ANR6696I MOVE DRMEDIA: CHECKOUT LIBVOLUME for volume > 309069 in library 8500 starting. (SESSION: 1923, > PROCESS: > 41) > > The tape is ejected into the cap but the state stays as "MountableinLib" > and doesn't change to vault > > Anyone see this before? > > Thanks! > > Dave Zarnoch > Nationwide Provident > [EMAIL PROTECTED] > W 302-452-4197 > C 302-462-8703