Hi , Here is the error I saw when trying to start up my second instance :
**************************************************************** Tivoli Storage Manager for AIX-RS/6000 Version 5, Release 1, Level 1.6 Licensed Materials - Property of IBM 5698-ISE (C) Copyright IBM Corporation 1999,2002. All rights reserved. U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corporation. ANR0900I Processing options file /tsmserv/bin/dsmserv.opt. ANR7811I Direct I/O will be used for all eligible disk files. ANR0990I Server restart-recovery in progress. ANR0200I Recovery log assigned capacity is 4092 megabytes. ANR0201I Database assigned capacity is 59680 megabytes. ANR0306I Recovery log volume mount in progress. ANR0358E Database initialization failed: sufficient memory is not available. When I put my bufpoolsize parameter back to it's original size, the second instance came up with no problem. The paging space ( total physical memory we have is 9Gb, paging space is 6Gb ) is barely used, only 10%. Rich -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of Kurt Beyers Sent: Monday, January 23, 2006 3:37 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Increasing bufpoolsize issue Rich, A bit of a wild guess, but is there enough swap space to host the increased buffpoolsize. I know that the buffpoolsize should remain in the physical memory. But if the second instance starts up after adding some additional swap space, you know that it was the bottleneck. Will TSM itself allocate the buffpoolsize in the physical memory anyway? regards, Kury ________________________________ Van: ADSM: Dist Stor Manager namens Richard Mochnaczewski Verzonden: ma 1/23/2006 21:34 Aan: ADSM-L@VM.MARIST.EDU Onderwerp: [ADSM-L] Increasing bufpoolsize issue Hi Everybody, I have two instances of TSM 5.1.6 running on my AIX server . I added 1Gb of physical memory and increased the bufpoolsize in both instances by 512Mb . After the reboot, one instance came up fine and the other one complained about not enough memory available . Why would it complain about memory, seeing that I had already increased the bufpoolsize by 512M ? Rich