I recently upgraded to 5.3.2.2 server level, about 2 1/2 weeks ago. I have 2 tsm servers, tsm1 and tsm2, each share a 3589 library with 5 frames 60 drives. tsm1 is the library manager. We have been noticing lately that when we run a report to show private, scratches, dbb vols, we have a column of private tapes that increases everyday that are really supposed to be scratch tapes. What I have found is, when reclamation runs on tsm2 for primary tape pools, it marks the tape as deleted and ready for scratch like it should, but on tsm1, it still shows the tape as private, if you "q vol" on either tsm server, they know nothing about the tape, but again "q libvol" shows the tape as private like below:
TSMLIB1 T01779 Private TSMCORP1 1,054 LTO I can check the tape out and recheck it in as scratch and it will be used as scratch from there out. I went back and checked our reports, and before the upgrade, we had 3-5 tapes in the status, now we have 140, If I look at the daily reports each day, it grows each day from the day we did the upgrade. So, has anybody else seen this with 5.3.2.2 or any other ideas on what might be causing this. This email and any files transmitted with it are confidential and intended solely for the use of the addressee. If you are not the intended addressee, then you have received this email in error and any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. Please notify us immediately of your unintended receipt by reply and then delete this email and your reply. Tyson Foods, Inc. and its subsidiaries and affiliates will not be held liable to any person resulting from the unintended or unauthorized use of any information contained in this email or as a result of any additions or deletions of information originally contained in this email.