Here is the result: attribute value description user_settable
alt_addr 0x000000000000 Alternate ethernet address True busintr 147 Bus interrupt level False busmem 0xe8080000 Bus memory address False chksum_offload yes Enable hardware transmit and receive checksum True compat_mode no Gigabit Backward compatability True copy_bytes 2048 Copy packet if this many or less bytes True delay_open no Enable delay of open until link state is known True flow_ctrl yes Enable Transmit and Receive Flow Control True intr_priority 3 Interrupt priority False intr_rate 10000 Max rate of interrupts generated by adapter True jumbo_frames no Transmit jumbo frames True large_send yes Enable hardware TX TCP resegmentation True media_speed Auto_Negotiation Media speed True rom_mem 0xe8040000 ROM memory address False rx_hog 1000 Max rcv buffers processed per rcv interrupt True rxbuf_pool_sz 2048 Rcv buffer pool, make 2X rxdesc_que_sz True rxdesc_que_sz 1024 Rcv descriptor queue size True slih_hog 10 Max Interrupt events processed per interrupt True tx_que_sz 8192 Software transmit queue size True txdesc_que_sz 512 TX descriptor queue size True use_alt_addr no Enable alternate ethernet address True -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Richard Sims Sent: Tuesday, May 02, 2006 7:57 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: archive hangs Ralph - That's not a helpful query, as it shows possibilities rather than prevailing setting. Use: lsattr -E -l ent0 -H Whereas the initial goal was to achieve greater throughput with gige, pursue Jumbo Packets if you haven't already. Richard Sims On May 2, 2006, at 7:51 AM, Levi, Ralph wrote: > Thanks Dirk. Here is what I get. Am I missing some kind of driver > perhaps ? > > [EMAIL PROTECTED]:/ # lsattr -R -l ent0 -a media_speed > 10_Half_Duplex > 10_Full_Duplex > 100_Half_Duplex > 100_Full_Duplex > Auto_Negotiation