Have you restarted or run an inventory on the physical library? -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of William Sent: Wednesday, July 19, 2006 9:58 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: Strange TSM Server problem.
Thanks Andy. I did check from TSM activity log, nobody is using it. I did check from library GUI and tapeutil, those tapes are actually in the slots not in drives. I did shutdown TSM Server/Library (TS3310) and restarted Library/TSM Server, still see those tapes are mounting and "In Use". Again, thanks! On 7/19/06, Andrew Raibeck <[EMAIL PROTECTED]> wrote: > > - Have you checked the TSM server activity log for any messages related to > the volumes in question? > > - Have you visually checked whether the volumes are actually mounted in > those drives? > > Regards, > > Andy > > Andy Raibeck > IBM Software Group > Tivoli Storage Manager Client Development > Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] > Internet e-mail: [EMAIL PROTECTED] > > IBM Tivoli Storage Manager support web page: > > http://www-306.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageManager.html > > The only dumb question is the one that goes unasked. > The command line is your friend. > "Good enough" is the enemy of excellence. > > "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 07/19/2006 > 09:04:04 AM: > > > Thanks Mike, > > > > I tried to dismount after reboot TSM Server, still failed: > > > > tsm: TSMSERVER>q mo > > ANR8330I LTO volume K00059L3 is mounted R/O in drive DRIVE1 (/dev/rmt1), > > status: IN USE. > > ANR8330I LTO volume K00062L3 is mounted R/O in drive DRIVE2 (/dev/rmt2), > > status: IN USE. > > ANR8330I LTO volume K00060L3 is mounted R/O in drive DRIVE3 (/dev/rmt3), > > status: IN USE. > > ANR8334I 3 matches found. > > > > tsm: TSMSERVER>dismount vol K00059L3 > > ANR8348E DISMOUNT VOLUME: Volume K00059L3 is not "Idle". > > ANS8001I Return code 11. > > > > > > Thanks Mike, the node removed after deleted backupset. > > > > > > > > On 7/19/06, Michael Bartl <[EMAIL PROTECTED]> wrote: > > > > > > William, > > > > > > (usually) if you don't see processes or sessions using a tape R/O, the > > > volume is held open just during the mount retention period. But this > > > doesn't match the current status "IN USE"... > > > Try to dismount the volumes. > > > > > > > Question 2: Why can't I remove this node? > > > > > > > > How can I find out what Object sets still exist for this node? > > > > > > Try >select * from backupsets > > > > > > > > > > > tsm: TSMSERVER>remove node NODE01 > > > > > > > > Do you wish to proceed? (Yes (Y)/No (N)) y > > > > ANR2339E REMOVE NODE: Object sets still exist for node NODE01. > > > > ANS8001I Return code 13. > > > > > > > Seems you have some undeleted Backupsets. > > > > > > tsm:>help ANR2339E > > > > > > ANR2339E Command: Object sets still exist for node node name. > > > > > > Explanation: A REMOVE NODE command has been entered for a node for > which > > > the > > > server is still storing backup sets. To remove a node, the node must > not > > > have any files or backup sets stored on the server. > > > > > > System Action: The server does not process the command. > > > > > > User Response: To remove the node, delete all backup sets from the > server > > > and reissue the command. > > > > > > > > > > > > Good luck, > > > best regards, > > > Michael > > > -- > > > Michael H. Bartl Mail: [EMAIL PROTECTED] > > > SpaceNet AG Tel: 089 / 32356-151 > > > Joseph-Dollinger-Bogen 14 Fax: 089 / 32356-299 > > > D-80807 Muenchen http://www.space.net/ > > > > > > Genug von Viren und Spam? SpaceNet_Mail hilft Ihnen - lesen Sie, wie > > > SpaceNet_Mail beim Muenchner Verkehrs- und Tarifverbund erfolgreich > > > eingesetzt wird: http://www.space.net/mvvnews/index.html > > > > > > Was wir sonst noch fuer Sie tun koennen, finden Sie unter: > > > http://www.space.net/ > > > >