You can do a move volume and it should move all the good files. You may have to do this a couple of times. This should get all the good files off the tape. Now try the restore. If that wont work then the only thing is delete the volume with discard=yes and you have lost data. If it is current data on the system the next backup will pick it up.
-- Phillip Ford Senior Software Specialist Enterprise Computing Services Schering-Plough Corp. (901) 320-4462 (901) 320-4856 FAX [EMAIL PROTECTED] -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Timothy Hughes Sent: Friday, July 28, 2006 10:29 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Audit & restore storage volume tape Hello, We were receiving the message below on a tape volume file in our primary storage pool during reclamation on 101645 processing causing it to fail. I performed a Audit Volume 101645 fix=yes on the volume in question. ANR1330E The server has detected possible corruption in an object being restored or moved. The actual values for the incorrect frame are: magic 53454652 hdr version 0002 hdr length 0032 sequence number 00000061 data length 00000000 server id 00000000 segment id 60002793965424476 48 crc 0000003D.(PROCESS: 187) ANR1331E Invalid frame detected. Expected magic 53454652 sequence number 00000061 server id 00000000 segment id 0000000008602819.(PROCESS The following message is now reoccurring during reclamation on the same tape volume (101645) in our primary sequential pool and causing reclamation to fail. This started to occur after I performed a Audit Volume 101645 Fix=Yes on a tape. ANR1162W Space reclamation skipping damaged file on volume 100646: Node XXXXXX200, Type Backup, File space /u14, File name /oradat/archive/TSIC/ TSIC_1_88894_525973123.arc. ANR0985I Process 193 for SPACE RECLAMATION running in the BACKGROUND completed with completion state FAILURE at Reclamation of storage pool LPOOL has ended. Files reclaimed 0, Bytes reclaimed: 0, Files reconstructed: 0, Unreadable files: 0. Question 1 - If I do a Restore Storage Pool volume for that tape and it will restore the damaged file (s) from the copy pool only. Is there any way to keep this volume from being marked destroyed since it's only the one file that is damaged automatically by TSM? Since there is only 1 file that is the problem. Question 2 - If the file on the copy pool volume is damaged also and causes the same message above after I do a Audit volume ###### fix=? how do I get rid of the ANR1162W message that is appears for that ONE file which causes reclamation to fail? TSM 5.3.2 Thanks in Advance! ********************************************************************* This message and any attachments are solely for the intended recipient. If you are not the intended recipient, disclosure, copying, use or distribution of the information included in this message is prohibited -- Please immediately and permanently delete.