UPDATE STGPOOL <stgpoolname> RECLAIM=50 ...should do it, if you have any tapes that are at least 50% empty, and you have two drives free. There's a whole discussion of this in the TSM Administrators Guide. If that still doesn't start reclamation, check to see if you have any tapes that are empty enough, with Q VOL. Beware that the number on UPDATE STGPOOL is the percent EMPTY, not the percent FULL, though of course that difference does not matter for the usual recommended setting of 50%.
Roger Deschner University of Illinois at Chicago [EMAIL PROTECTED] Academic Computing & Communications Center On Fri, 29 Sep 2006, Norita binti Hassan wrote: >Hi, > >How to start the reclamation process? Can anyone explain to me plssss... > >NORITA BINTI HASAN >Senior Programmer >Enterprise Systems Services >Information Communications Tech. Div >6th Floor,Pos Malaysia HQ >50670 Kuala Lumpur > >* : 03 - 22756638 >*: 016 - 6090530 > > > > >Pos Malaysia Berhad is Malaysia's national postal company > Visit us online at www.pos.com.my > >NOTICE >This message may contain privileged and/or confidential >information. If you are not the addressee or authorised >to receive this email, you must not use, copy, disclose >or take any action based on this email. If you have >received this email in error, please advise the sender >immediately by reply e-mail and delete this message. >Pos Malaysia Berhad takes no responsibility for the >contents of this email. > > >Email scanned and protected by POS Malaysia >