Leigh, The driver installed is the "IBM ULTRIUM III 3580 TAPE DRIVE (for Tivoli Storage Manager)". Should I uninstall the TSM Device Driver then ??
Thanks. Mario ----- Original Message ---- From: Leigh Reed <[EMAIL PROTECTED]> To: ADSM-L@VM.MARIST.EDU Sent: Tuesday, October 10, 2006 1:31:10 PM Subject: Re: TSM Device driver is not starting Mario You don't mention whether you have already loaded the correct IBM device drivers for LTO3's through Windows device manager, but the below might be of assistance. The way in which the Windows TSM device driver works changed at V5.2. See serwinref.pdf IBM Device Driver for 3570, 3590, and IBM LTO Devices Important: If you currently use 3570, 3590, or IBM LTO devices, you will need to install the IBMTape driver that supports your device. The Tivoli Storage Manager Device Driver will no longer recognize these devices. See the Administrator's Guide for more information and instructions on how to download the drivers and Installation and User Guides. If You need the specific IBM Tape device drivers for Ultrium drives. You can download them from ftp://ftp.software.ibm.com/storage/devdrvr/ Leigh -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Mario Behring Sent: 10 October 2006 16:54 To: ADSM-L@VM.MARIST.EDU Subject: [SPAM: 14.000] [ADSM-L] TSM Device driver is not starting Hi list, I have a TSM 5.3.2 Server running on a W2K SP4 with a IBM Ultrium LTO III 3580 connected via SCSI interface. The TSM Device Driver service does not start and I get the following error: "The system could not find the device specified"........ Please advise. Thanks Mario