Hi, The /proc file system has the information you are looking for:
Server:~ # cat /proc/scsi/qla2xxx/* | grep adapter-port scsi-qla0-adapter-port=210000e08b822690; scsi-qla1-adapter-port=210100e08ba22690; scsi-qla2-adapter-port=210000e08b81a2a8; scsi-qla3-adapter-port=210100e08ba1a2a8; scsi-qla4-adapter-port=210000e08b8195b5; scsi-qla5-adapter-port=210100e08ba195b5; scsi-qla6-adapter-port=210000e08b8121af; scsi-qla7-adapter-port=210100e08ba121af; The directory (qla2xxx) might be different, depending on the type of FC HBA you are using. Regards, Kurt > -----Oorspronkelijk bericht----- > Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Namens Richard > Sims > Verzonden: vrijdag 5 oktober 2007 15:57 > Aan: ADSM-L@VM.MARIST.EDU > Onderwerp: Re: [ADSM-L] WWN under Linux > > On Oct 5, 2007, at 8:47 AM, Sandeep Jain wrote: > > > Hi Richard, > > > > My TSM server is on Windows ... > > In Windows, the TSM device driver provides the command 'tsmdlst', > which will report the WWN. > > Not sure about a Linux command: possibly, the 'lsscsi' command may do > it, if that is installed on your Linux. > > Richard Sims *** Disclaimer *** Vlaamse Radio- en Televisieomroep Auguste Reyerslaan 52, 1043 Brussel nv van publiek recht BTW BE 0244.142.664 RPR Brussel http://www.vrt.be/disclaimer