Hi all A little background. Up until recently I had the following setup.
Disk BACKUPPOOL migrating to 3592 TAPEPOOL with a 3590 COPYPOOL. I needed to create a new 3592 COPYPOOL as the number of 3590 off-site tapes being sent each day was getting too large. So here is what I did. I marked the original TAPEPOOL as readonly and renamed it to TAPEPOOL_3592_OLD I then marked the original COPYPOOL as readonly and renamed that to COPYPOOL_3590_OLD Next I created a new sequential access 3592 TAPEPOOL and made sure that it was the NEXT storage pool for the BACKUPPOOL I then created a new 3592 COPYPOOL. My question is this... Can I use the 'MOVE DATA' command to move data from volumes in the old TAPEPOOL_3592_OLD to the new 3592 TAPEPOOL? If so, will this new data also need to be copied to the COPYPOOL again? Many thanks Farren Minns John Wiley & sons -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Robert Ouzen Ouzen Sent: 30 January 2008 10:26 To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Script little question - solved Sorry The age maybe !!! I just needed to increase my Command window Regards Robert Hi to all I wanted the output of this script in wide orientation (like table) but always no matter what I tried I got as a list !!!! SET SQLDISPLAYMODE wide select Distinct CHAR(p.source_name,20)as "Source Name" ,CHAR(r.drive_name,12)as "Drive",CHAR(p.device,20) as "Device",CHAR(r.online,12) as "Drive Online" ,CHAR(p.online,12) as "Path Online",CHAR(r.allocated_to,15) as "Allocate TO" from drives r,paths p where r.library_name=p.library_name and r.drive_name=p.destination_name Always get: Source Name: ADSM Drive: FILE2DRV4 Device: file rive Online: YES Path Online: YES Allocate TO: Source Name: ADSM Drive: FILE2DRV5 Device: file rive Online: YES Path Online: YES Allocate TO: Source Name: ADSM Drive: I2000DRV1 Device: /dev/rmt0 rive Online: YES Path Online: YES Allocate TO: ADSM Source Name: ADSM Drive: I2000DRV2 Device: /dev/rmt1 rive Online: YES Path Online: YES Allocate TO: ADSM I obvious miss something ??? Regards Robert Ouzen ---------------------------------------------------------------------- The information contained in this e-mail and any subsequent correspondence is private and confidential and intended solely for the named recipient(s). If you are not a named recipient, you must not copy, distribute, or disseminate the information, open any attachment, or take any action in reliance on it. If you have received the e-mail in error, please notify the sender and delete the e-mail. Any views or opinions expressed in this e-mail are those of the individual sender, unless otherwise stated. Although this e-mail has been scanned for viruses you should rely on your own virus check, as the sender accepts no liability for any damage arising out of any bug or virus infection. John Wiley & Sons Limited is a private limited company registered in England with registered number 641132. Registered office address: The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ. ----------------------------------------------------------------------