For our last upgrade to 5.4 we ran expiration on the "test" upgrade and a few backups and restores without giving access to the real data. Once upgraded we ran a backup, restore with fresh data and a restore with "upgraded" data.
Our last upgrade we ran into a problem during reclaim (fixed with a patch), but we have not figured out a way to test that without endangering the data. Andy Huebner -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Björn Rackoll Sent: Thursday, July 17, 2008 9:03 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] TSM upgrade to 5.5.1 Hi, currently we have TSM 5.3.4.2 running on AIX 5.3 (and an IBM 3494 tape library with eight 3592 drives, Atape 10.7.3.0) and are planning to upgrade to 5.5.1.0 soon. I've already tested this upgrade on my test machine, and it worked fine. This absence of any problem made me even a bit suspicious. :-) My questions: - Which kind of tests would you recommend performing before you'd declare a new TSM version 'ready for production'? I've read Technote 1196013 and the relevant section in ADSM.QuickFacts. Performing a simple backup and restore from different clients worked fine, LAN-free is not used. - Do you know of any pitfalls in 5.5.1.0 or should it be safe to use on the server? Regards, -- Bjoern Rackoll University of Hamburg Regionales Rechenzentrum Zentrale Dienste Schlueterstr. 70 20146 Hamburg Tel.: +49 (0)40 42838 - 63 11 Fax: +49 (0)40 42838 - 62 70 E-Mail: [EMAIL PROTECTED] This e-mail (including any attachments) is confidential and may be legally privileged. If you are not an intended recipient or an authorized representative of an intended recipient, you are prohibited from using, copying or distributing the information in this e-mail or its attachments. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete all copies of this message and any attachments. Thank you.