Robert,

This is a known problem who has a simple solution : regedit.
Just point to the key
HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup,
then double click on "DRM" to open the key, and immediately close it (no
modification needed) !
Your problem is now solved ...

Cheers.

Arnaud

************************************************************************
******
Panalpina Management Ltd., Basle, Switzerland,
CIT Department Viadukstrasse 42, P.O. Box 4002 Basel/CH
Phone: +41 (61) 226 11 11, FAX: +41 (61) 226 17 01
Direct: +41 (61) 226 19 78
e-mail: arnaud.br...@panalpina.com
************************************************************************
******


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Robert Ouzen Ouzen
Sent: mercredi 21 janvier 2009 13:27
To: ADSM-L@VM.MARIST.EDU
Subject: error ANS5280E ... Please help

Hi to all

 

I have a new issue now baking the systemstate with the error ANS5280E
enumeration from a file set or file listed failed ?????

 

My TSM client is 5.5.1.10 on a Windows 2003 SP2 system.

 

I search the web for the error ANS5280E and found a paper with
instructions as:

 

HOW TO REPAIR THE REGISTRY KEY - METHOD 2 This method uses the reg.exe
utility from a Windows OS command prompt.

1. Confirm the invalid DRM data value by running the following command:

reg query
HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup /v
DRM


Note: This is one long command even though it might appear in this
article on multiple lines.

The output look will look something like this:

! REG.EXE VERSION 3.0

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesN
otToBackup
DRM REG_MULTI_SZ C:\Documents and Settings\All Users\DRM\* /s\0


The important part is the very last line. Breaking it into 3 parts:

*       DRM is the registry value, and should appear as shown above.

*       REG_MULTI_SZ is the value type. This should also be exactly as
shown above.

*       C:\Documents and Settings\All Users\DRM\* /s\0 is the
interesting part. If it ends with /s\0\0, then it is unaffected (in
which case ANS1009W would not be expected). However, if it ends with
/s\0 as shown above, then it is subject to the ANS1009W message.


2. Use reg.exe to repair the value:

reg add
HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup /v
DRM /t REG_MULTI_SZ /d "C:\Documents and Settings\All Users\DRM\* /s" /f


Note: This is one long command.

Do not put the \0\0 part in the command. When the value is placed in the
registry, it will automatically be terminated properly.

After running the above command, you can repeat step 1. to confirm that
the data is correct. The data value should now end with /s\0\0

I did on my server but when I run a query I got it without any 0  at all
!!!!!!

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesN
otToBackup
DRM REG_MULTI_SZ C:\Documents and Settings\All Users\DRM\* /s

I check in an another server with the same configuration , TSM client
5.5.1.10 windows 2003 SP2 who the systemstate is working fine. There too
when I run the query I got without the 0

Can anybody suggest what I can do to fix this error ANS5280E

T.I.A Advance

Robert

 

 

 

Thanks for any replies!

 

Rob

Reply via email to