Hello. Get me out of this email loop please! Iv been stuck in it for months! Thanks
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Richard Rhodes Sent: Friday, May 29, 2009 5:10 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] SANergy As I said, it technically worked for AIX. Here are my notes from IBM's web site . . .which BTW, I can't find anymore. The was ALL I could ever find on setting this up. What it doesn't describe and is necessary, is that you have to put IP on the SAN switches. rsfebkup4p:/tsmdata/tsm_scripts/san==>./run_cmd.ksh fab11-10 ipaddrshow === run_cmd fab11-10 ipaddrshow SWITCH Ethernet IP Address: 172.17.90.60 Ethernet Subnetmask: 255.255.255.0 Fibre Channel IP Address: none Fibre Channel Subnetmask: none Gateway IP Address: 172.17.90.2 DHCP: Off ============================================== IP over FC IP over Fibre Channel is now available for AIX 5.2 at the following fileset levels: devices.common.IBM.fc.rte 5.2.0.30 devices.pci.df1000f7.com 5.2.0.30 devices.pci.df1000f7.rte 5.2.0.30 After rebooting to activate the updates, you should find a new fcnetX device associated with each Fibre Channel adapter: # lsdev -Cc driver fcnet0 Defined 44-08-02 Fibre Channel Network Protocol Device IP over FC is not activated by default. To configure an fcnetX device to come Available at boot/cfgmgr: smitty dev --> FC Adapter --> FC Network Protocol Device --> Enable a FC Network Device --> fcs0 NOTE: You will need to repeat this step any time you delete the fcnetX device. Now the fcnetX device will come Available and a TCP/IP interace will be created when cfgmgr runs: # lsdev -Cc driver fcnet0 Defined 44-08-02 Fibre Channel Network Protocol Device # cfgmgr # lsdev -Cc driver fcnet0 Available 44-08-02 Fibre Channel Network Protocol Device # lsdev -Cc if fc0 Defined 44-08-02 Fibre Channel Network Interface An FC interface can be configured like any other IP interface: # smitty chinet --> fc0 This is an IPv4 only implementation. There is no industry standard Mehdi Salehi <iranian.aix.supp o...@gmail.com> To Sent by: "ADSM: ADSM-L@VM.MARIST.EDU Dist Stor cc Manager" <ads...@vm.marist Subject .EDU> Re: SANergy 05/29/2009 09:43 AM Please respond to "ADSM: Dist Stor Manager" <ads...@vm.marist .EDU> That's a wonderful solution, Richard. I loved that. Regards, Mehdi Salehi ----------------------------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.