Hi all, @Nick Laflamme You were right. I've changed slot count from 5000 to 2000 and it worked. BTW, I've also tested with 4399 first ;-) and it didn't work.
@Andrew and Remco Thank you Andrew for recommending me an alternative solution/product but, in this case I do agree with Remco. Thank you all, jmc -----Original Message----- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Remco Post Sent: quarta-feira, 2 de Novembro de 2011 23:12 To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] V6.2.3.0 lb device stops working with DataDomain STK L180 virtual library To make things very clear, there is no relevant design limitation in TSM, this is is just a bug. Of course Gresham software is just as vulnerable to human error. These things happen to the best of us. Don't believe the FUD that commercial software vendors spread. On 2 nov. 2011, at 23:52, Support - US wrote: > Such problems do not exist when you use an externally managed library. With an External Library Manager TSM is not aware of the slot count of a library, thus removing any dependence on TSM having pre-existing knowledge of library model architecture. This approach also allows for infinite scalability with no management impact in TSM. > > Andrew > Gresham Storage Solutions > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf > Of Nick Laflamme > Sent: Wednesday, November 02, 2011 4:08 PM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] V6.2.3.0 lb device stops working with DataDomain > STK L180 virtual library > > Your DataDomain VTL has more than 4400 slots in it. If you can, reduce it to <4400 slots, and it will resume normal behavior. You'll need to delete and recreate the library for this to take effect, but it will work. > > I've got a PMR open with IBM and a Case open with DataDomain on this issue. I don't have the numbers handy, but IBM and DD are talking to each other about this. > > Nick > > On Nov 2, 2011, at 10:43 AM, Costa, Justino wrote: > >> Hi, >> >> I've just upgraded a V6.2.2.2 TIVsmSdev pkg on Solaris x86_64 to >> v6.2.3.0 and the DataDomain virtual library stopped working ! >> >> After downgrading back to v6.2.2.2, it starts working again with no >> single error whatsoever. >> >> The errors I get (in hundreds) with TIVsmSdev v6.2.3.0, after >> starting the server (with TIVsmS still on v6.2.2.2) and executing an >> "audit libr xxx checkl=barcode" are: >> >> ANR8821E Barcode of element 8224, ' ', exceeds 32 characters in >> length. >> ANR8479W Unable to audit slot-element 8224 of library LIB61. >> >> Any ideia of what it might be ? >> >> thks, >> Jmc -- Met vriendelijke groeten/Kind Regards, Remco Post r.p...@plcs.nl +31 6 248 21 622 Think green - keep it on the screen. This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.