Hi, AFAIK, preparedb will upgrade the DB to 5.5 and do some checks. No matter as you already use 5.5.
I would backup the database before halting the server and doing the preparedb. You need to create the device class for the extractdb before halting the server. You cannot just add it to the devconfig file. Regards, Erwann "Lee, Gary" <g...@bsu.edu> a écrit : >So far, sounds good. >This is my plan. > >1. run prepared on 5.5.4 server. > >Two create a file devclass on 5.5.4 server pointing to /upgrade. > >3. mount a file system from the new tsm server onto /upgrade. > >4. extract the db to /upgrade. > >5. restart the 5.5.4 server for production work. > >6. do the insert on the 6.2.4 server. > >Does this look reasonable? > >I have so far not found an explanation of what the dsmupgrd prepared >does. > >Any ideas? > >Gary Lee >Senior System Programmer >Ball State University >phone: 765-285-1310 > > > >-----Original Message----- >From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf >Of Huebner, Andy >Sent: Wednesday, February 27, 2013 9:41 AM >To: ADSM-L@VM.MARIST.EDU >Subject: Re: [ADSM-L] upgrae from 5.5.4 to 6.2.4 > >We did an upgrade from 5.4 to 6.2. >I used a copy (SAN trick) for the source of the upgrade. I do not >think the 5.5 to 6.2 upgrade changed the copy, I did not check, but I >did not see any writes to the disks. The extract was written to a new >disk. We created a new devclass (file) to write the data to. >Our about 200GB DB took about 3 hours to extract, the insert to 6.2 >took 10+hours. This was done on a P6. >We did 3 practice upgrades for each server. Only 1 upgrade test failed >because we did not get a clean copy. > >You might consider 6.2.5 as your target. > >Good Luck. > >Andy Huebner > > >-----Original Message----- >From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf >Of Lee, Gary >Sent: Wednesday, February 27, 2013 8:20 AM >To: ADSM-L@VM.MARIST.EDU >Subject: [ADSM-L] upgrae from 5.5.4 to 6.2.4 > >I want to do a couple of practice upgrades of our tsm server v5.5.4 to >a different box running v6.2.4. > >Reading the upgrade guide, I have to do the > >Dsmupgr prepared > >Then a > >Dsmupgrd extractdb > >I have not yet determined whether these will render the 5.5.4 server >unusable? > >Has anyone out there done this and if so, what should I expect? > >Gary Lee >Senior System Programmer >Ball State University >phone: 765-285-1310 > > -- Envoyé de mon téléphone Android avec K-9 Mail. Excusez la brièveté.
