Hi Mickael, If both pools are primary storage pools you can configure tapepool2 to be the next storage pool for tapepool. You do this with the update storage command, for example: "UPDate STGpool tapepool NEXTstgpool=tapepool2"
Then either update the original tapepool migration thresholds to zero and all of the data in tapepool will migrate to tapepool2, or use the MIGrate STGpool command. "update stgpool tapepool LOWmig=0 HIghmig=0" Or "MIGrate STGpool tapepool LOwmig=0 Duration=#of-minutes" Replace #of-minutes with the amount of time you want the process to run in minutes. Using the "update stgpool" command there is no duration so you can just let it run to completion. -Rick Adamson -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of mik Sent: Monday, December 09, 2013 4:46 AM To: [email protected] Subject: [ADSM-L] Question Tapepool I know the response it's impossible Now i have more question ^^ If i create new tapepool named by exemple TAPEPOOL2 with disk, can i migrate the actual diskpool to the new TAPEPOOL2 (disk) If it's possible to performe move data AXXXXXX (from tapepool) to stg=TAPEPOOL2 ? Can i have multiple disk on TAPEPOOL2 ? The goal of that it's to remplace the actual tapepool from tape to tapepool2 disk (one of drive are down and the second was tired) it's just a tempory solution to continue to save the data just before to export nodedata to the new TSM server with LTO6 tape library (actually TSM LTO3 with one HS drive and second tired drive) Thanks for reply. Regards, Mickael +---------------------------------------------------------------------- |This was sent by [email protected] via Backup Central. |Forward SPAM to [email protected]. +----------------------------------------------------------------------
