Hi Jeannie, Would trying search=bulk make a difference?
label libv XXX search=b checkin=scr labels=b overwrite=y waitt=0 On Tue, Dec 23, 2014 at 7:39 AM, Jeanne Bruno <jbr...@cenhud.com> wrote: > Hello. We are using TSM manager 6.3.3.0. > Tape Library is a DS3512. > I'm trying to check in some brand new tapes (LTO Ultrium 1.5TB). > On the DS3512, I choos the library and insert the tape into the machine. > On the command line I use this command: > > label libv xxxxxx search=yes checkin=scratch labels=b overwrite=y > > My output is this: > > ANR2017I Administrator ADMIN issued command: LABEL LIBVOLUME xxxx > search=yes checkin=scratch labels=b overwrite=y > ANR0984I Process 120 for LABEL LIBVOLUME started in the BACKGROUND at > 09:29:14. > ANR8799I LABEL LIBVOLUME: Operation for library XXXXXX started as process > 120. > ANR8801I LABEL LIBVOLUME process 120 for library XXXXXX completed; 0 > volume(s) labeled, 0 volume(s) checked-in. > ANR0985I Process 120 for LABEL LIBVOLUME running in the BACKGROUND > completed with completion state SUCCESS at 09:29:19. > > 0 volumes, but finished successfully and when I query the library XXXXXX, > the new tape does not show in the list. > > I have also tried this command: > CHECKIN LIBVOLUME xxxxxx SEARCH=YES CHECKLABEL=YES status=scratch > WAITTIME=0 VOLLIST=A00xxxxL5. > Results are the same. > > I have also tried putting the tapes on the door of the machine and not > doing the 'insert media'...again results on the same. > We just received 30 new tapes last week and I've tried about 10 of them so > far. > I have used the cleaning tape and did the clean process and also rebooted > the DS3512.....same results afterwards. > > Any help, suggestions would be greatly appreciated. > > > > ____________________ > Jeannie Bruno > Senior Systems Analyst > jbr...@cenhud.com<mailto:jbr...@cenhud.com> > Central Hudson Gas & Electric > (845) 486-5780 >