Hi to all In TSM Version 7.1.1+ there is a new feature called SET REPLRECOVERDAMAGED
To use it need to be ON with the command: SET REPLRECOVERDAMAGED ON Here the help below but don’t understand what is the default YES or NO ? During a replicate node. RECOVERDamaged--=--+-Yes-- +-No--- +-Only- RECOVERDamaged Specifies whether a recovery process is started on a target replication server after the node replication process is completed. This parameter is optional, and it overrides any value that you specified for the RECOVERDamaged parameter when you defined or updated a node. You can specify one of the following values: Yes Specifies that a replication process is started to recover damaged files, but only if the setting for the REPLRECOVERDAMAGED system parameter is ON. If the setting is OFF, damaged files are not recovered. No Specifies that damaged files are not recovered. Only Specifies that a replication process is started for the sole purpose of recovering damaged files, but only if the setting for the REPLRECOVERDAMAGED system parameter is ON. If the setting is OFF, damaged files are not recovered, and you receive a notification that recovery was not started. Best Regards Robert Ouzen Haifa University Israel