Craig
Maybe a chain link fence next to the guy wires
to the ground connection Extend fence out to the the point the guy wires
is about
10 foot above ground???
We do that and use light weight orange fiber duct on the guy wires to
the ground lug
Mitch
On 9/29/2018 3:15 PM, Craig House wrote:
Yes. Elevated guy supports. The location is an atv off road ranch and they
are worried about people getting clothes lined.
Sent from my iPhone
On Sep 29, 2018, at 15:05, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:
10 foot tall wooden poles for an aerial attachment only need to be set maybe
4 feet deep.
Or are you talking about elevated supports for guy wires?
If so, you probably need to dig a trench for an L shaped sleeper and the
some rebar in sonotube for the poles and anchors.
-----Original Message-----
From: Craig House
Sent: Saturday, September 29, 2018 12:55 PM
To: af@af.afmug.com
Subject: [AFMUG] Anchor holes
I have a tower construction location which is going to require 10 foot poles
above ground as an attachment point for the wires at each of the holes. I
have the pipes constructed but I’m concerned about being able to drill the
holes in our soil and ground to accommodate the pipes. Has anyone done
something like this before I’m not looking to do typical anchor holes that
are 6 feet or 8 feet wide and a foot and a half across I’m looking for an
auger hole that is a straight 6 to 7 feet down
Sent from my iPhone
Sent from my iPhone
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com