the auto discovery display the voltage values that I am looking for, so I guess no extra steps are needed there. But I am having issues figuring out how to create an alert for say "voltage" and then configure it to alert me when said voltage goes below a certain threshold and comes back up again. Then I would like to apply that rule to certain type of device only.
On Wed, Feb 20, 2019 at 10:09 AM David Coudron <david.coud...@advantenon.com> wrote: > We haven’t set the Packetflux up in LibreNMS, but if you have an OID for > the inputs you want to monitor, you can set up LibreNMS to monitor them and > alert off them. > > > > I can send along what we did on OIDs that LibreNMS didn’t already have in > its discovery if you want. > > > > Thanks, > > > > David Coudron > > > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Sam Lambie > *Sent:* Wednesday, February 20, 2019 10:09 AM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* [AFMUG] Packetflux alert settings for Librenms? > > > > Hey all, > > Has anyone set up alerts with a Sitemonitor and the power Inputs with > Librenms? Got anything that you would care to share? > > I am still trying to wrap my head around setting up alerts and exactly > what alerts are important. > > > > Thanks > > Sam > > > > -- > > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
