Brace arms are attached with regular bolts. U bolts hold the vertical
antenna mount to the plate that the arms attach to.
-----Original Message-----
From: Robert Andrews
Sent: Monday, March 04, 2019 6:00 PM
To: af@af.afmug.com
Subject: Re: [AFMUG] Latest iteration.
I thought from the image that the brace arms were attached with u bolts
and so were adjustable to make up for different angles/distances between
studs, must have seen that wrong...
On 03/04/2019 03:14 PM, ch...@wbmfg.com wrote:
Maybe I will make that an option.
*From:* Brian Sullivan
*Sent:* Monday, March 4, 2019 4:12 PM
*To:* af@af.afmug.com
*Subject:* Re: [AFMUG] Latest iteration.
Adjustable length support arms help when you are trying plumb the mast/hit
a stud.
Roof trusses are sometimes 2' on center. (at least on my house they are)
On 3/4/2019 4:52 PM, Adam Moffett wrote:
Baltic has an add-on tray that bolts onto an existing non-pen mount to
make it a ridge mount. It's just a few more pieces of angle iron.
https://www.balticnetworks.com/non-penetrating-roof-peak-tray.html
I've added that tray onto a Rohn non-pen just by drilling a couple of new
bolt holes in the corners of the Rohn. Otherwise the dimensions were
close enough. On a Rohn the mast ended up not plumb, but on a shallow
pitched roof it was good enough. If you bought Baltic's whole assembly
then you'd have a u-slot to adjust a 3rd leg on the nonpen mount to bring
it to plumb.
https://www.balticnetworks.com/maxxwave-adjustable-2in-non-penetrating-roof-mount.html
I'm not saying you should or shouldn't do a ridge mount, but these
products do already exist at decent prices and I can't picture what
differentiation there would really be. </negativityMode>
Maybe yours would be more expensive than Baltic, but more rugged and
cheaper than Baird?
-Adam
On 3/4/2019 4:12 PM, ch...@wbmfg.com wrote:
Ridge mount.
*From:* Ken Hohhof
*Sent:* Monday, March 4, 2019 1:58 PM
*To:* 'AnimalFarm Microwave Users Group'
*Subject:* Re: [AFMUG] Latest iteration.
Are people asking for a flat roof non pen, or a peak (ridge) mount? It’s
not hard to find a good, relatively inexpensive flat roof non pen (Rohn
and Nello have lots of variations), so I’m kind of assuming people want
a peak mount?
Baird makes nice ones, but they aren’t cheap.
https://www.bairdmounts.com/products/wireless/by-category/Peaked-Roof-Mounts?ccid=18
*From:* AF mailto:af-boun...@af.afmug.com *On Behalf Of *ch...@wbmfg.com
*Sent:* Monday, March 4, 2019 2:21 PM
*To:* af@af.afmug.com
*Subject:* Re: [AFMUG] Latest iteration.
Been asked for a non pen version. Seems like there are tons of them out
there.
Is there a need for a particular configuration that you can’t find?
This is designed to be able to support a 2-3’ diameter licensed
microwave dish.
*From:*ch...@wbmfg.com
*Sent:*Monday, March 4, 2019 12:34 PM
*To:*af@af.afmug.com
*Subject:*Latest iteration.
Roof mount.
Getting close to making some prototypes.
Any suggestions or critiques?
image
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
